Palmaris

Unfortunately I do not have source for anodizing Orange. All my sources only Mil-A- 8625 Type III Class 1 or 2.

Made in 6061T6

Thank you very much. Most likely Monday I will machine it. I will keep posted with results

Some more ideas

Here is installed

Just finished mine for regular TS. Today will go on hard anodizing.

So what it will take to get them from you?

This is my question-where I can buy stock or stock compatible spare followers and springs

I am not competing or attending any competitions. I just recreational shooter-paper targets and gongs. I just want to have spare parts. These items are very cheap and have them in the toolbox-pure benefit.

How many shots went from that mold? I don’t think mold could wear out that fast. Usually it is about 100K shots minimum. Did they make that many TS?

Thank you very much will this follower keep slide open after last round from magazine?

Hey guys, can someone recommend replacement springs and followers for magazines? In US. Thx a lot

Rifle Gear has a lot of TS in stock, with price tag $1129. But interesting thing is-look at dust cover and you will find that looks like TSO, not TS.

I installed on TSO #13 Green spring from CGW and brass is flying about 6-7 feet away. I guess it is good number and I will keep it that way. On my TS I keep original spring and have the same distance for brass.

In my TSO 9mm recoil spring on the gun measured #14. Today measured.

Today I had chance to measure springs on calibrated push\pull force gauge. To my surprise all springs were within reasonable limits as claimed. Except original spring from TSO, that came out #14, not 16 as claimed on internet. The only spring I didn’t measured was Green from CGW-it is install in the gun.

My scale doesn't go that far, only at 11 lbs. I will look for another scale. Thank you very much. I did try and compress them to certain length ( the same for all of them) and if we take to consideration that original on TSO is #16, CGW #14 Gray is actually "reading" #15 and #13 Green actually "reading" #14 (this is not actual numbers, they just about #1 or 2# less then original TSO spring). I am not sure if this reading accurate, so it is not statement, it is assumption. Original spring on TS is "reading" #14. I set up TSO with "#14" (green from CGW #13). Will try tomorrow and will report how it goes.

Thank you Sir. How much do you compress spring? Unitl it closed all coils (all the way)?

I ordered some recoil spring from CGW and they came today. I replace original on TS with Green (#13) and it is much stronger than #13 on TSO. Did anybody have chance to make the same change and have had the same feeling? There is no way I can measure real ##, so I am relaying on info from manufacturers.

Thank you Sir

Here is final drawing of my plug