Fo0
-
Posts
510 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Fo0
-
-
no problems with catching half cock
-
What are your thoughts on pre travel of the trigger? Is it a good idea to remove as much as possible? I finished putting a BOLO disconnector in a Tanfoglio and am wondering if I should take more material off to create more pre travel or if this is fine / safe? Thanks
-
if you buy a Tanfoglio and have any problems people will blame the design and that you should have got a 2011 even though there are threads in this section about 2011's with similar problems
if you plan on competing with it you will have to work twice as hard to get half the respect as a 2011 or Czechmate
-
DoubleTap Sports Scope Mount for C-More RTS2/SIG Romeo 3/Leupold Delta Point Pro Tanfoglio
-
Tanfoglio has 38 super / comp option if that is your likening
It doesn't have the small safety detent and springs like CZ when taking the gun apart
It is possible to limit all pre travel in a Tanfoglio - I never seen a Czechmate hammer with a disconnector hole
-
anyone have a 18 round magazine they are willing to sell to me
-
44 minutes ago, Manwithnoname said:
The X5 rod may work, but it’ll probably stick out of the slide and shorten the slides stroke. There is an option to modify for regular full size slide on the springer rods.
ok nice - i didnt read the fine print after the 'x5' headline
I also just found one on thesigarmorer website too
-
What tungsten guide rod can you use - will the model made for the x5 work
-
On 8/9/2019 at 10:31 AM, Aircooled6racer said:
Hello: You can drill and tap a hole in the bottom of a comp for a set screw and that will stop it from indexing if you countersink slightly into the barrel. Like I said you can lighten a bull barrel on the sides and bottom. Cone comp having 360 degree contact surface is not true in a 1911. Thanks, Eric
does a supported guide rod plug make a difference
-
2 hours ago, LawDog324 said:
Typically you would measure where your finger rest on the trigger with a normal grip, right at the center point or just below center.
i noticed that on this forum but every one have different areas
-
6 hours ago, Aircooled6racer said:
Hello: Where are you testing the trigger pull from? Thanks, Eric
Where are you supposed to measure from?
Cars are rated at max horsepower usually at the highest rpm but you dont drive around on the rev limiter
-
sorry second in production
-
5 minutes ago, B_RAD said:
We're completely speculating here. Or at least I am. But I'd ask, why didn't he shoot a tanfo in open or limited? Again, pure speculation here but I'd bet the Beretta will be more like the cz/tanfos.
I'll be honest, I can't give a good reason why or what specifically it is that makes the 2011 seem to be better than the other options. I think(feel is probably more correct) the 2011 does everything better. More accurate, flatter, reloads are better. I mention the too guys because it makes sense to me that the top level of every type of competition, gravitate towards the equipment they feel is the best for their scores. I'm not recommending just blindly following the leader but that kinda makes more sense than blindly following the internet forum guy.
Again, all this is just my opinion and how things make sense to me.
look up what JJ won limited uspsa nationals with last year - almost positive it was a tanfoglio
-
5 minutes ago, MikeBurgess said:
My only issue with Tanfoglios (and I have a few) is the factory barrel comp setup is sub optimal for 9mm major and unnecessarily loud, they are probably better in IPSC with 160 PF major in open, and if you don't like the factory offering there are very few options to get something you may like better. I ended up making my own cone comp to get something that works the way I want.
Have you tried the Tanfoglio Domina
-
it is true Tanfoglios dont have as much aftermarket items as 2011 if your looking to have a custom gun
but:
2011 grip is held on with 2 and a half screws (STI even has 2 fake screws on their plastic grip)
I think my Tanfoglio trigger is better than 2011
I like Tanfoglio assembly/disassembly better than 2011
2011 is a 1911 with 20 different grip/frame options to make it double stack
you can follow the top level sponsored shooters but only one person can win a match
-
I like my tanfoglio better than my 2011
2.thumb.JPG.1f68768a0aa0c0dd8951f5a9b4010bd8.JPG)
-
would something like this work using the v8 version compensator and having a gunsmith add the v4 in the comp and fitting to a v12 slide/barrel
-
On 7/20/2019 at 4:14 AM, Apolo said:
Comps. Not in order of preference. Just explained.
V12 - pros. Flat and short. Points fast. Light.
Cons. More powder, loud, hand hit.
Durso - pros. Soft, less powder, less hand hit.
Cons. Some may not like length. Heavier. Recoil wobbles (ymmv)
V4 (V12 minus 8 popple holes)
Pros. fairly flat. Light. Less powder. less hand hit. Tracked well with no wobbles. Works well in conjuction with limited slide
Cons. ?
V10 with straight 5/32 holes
Pros. Flattest, short, point fast. Less hand hit than v12
Cons. Powder comparable to v12. Custom and not factory.
3 port- to be continued...one is on order.
which three port comp do you have on order - the v8 version?
-
9 minutes ago, Kema said:
I was trying to get Atlas mount, but they are not shipping overseas. All my RTS2's have failed around 6k so I am looking for alternatives during wintertime. Trijicon SRO is very interesting but at the pricepoint of 800 EUR you can buy two 510c and I already have one at PCC, which I really like.
try speedshooters - i think they ship overseas under $100 for Atlas 510c mount
-
On 3/16/2019 at 11:59 AM, je85 said:
What a deal!! Only $141 thats hilarious plus $20 for spring and follower and another $20 for the pad. $181 LMFAO
Thats more than tuned 2011 mbx mags
I'll pass....
$214.00 now on EAA website
-
1 hour ago, Brian04rs said:
Tungsten grip is available from Sig and in stock right now for anyone interested
Sent from my iPhone using Tapatalksays out of stock
-
6 hours ago, Zeros said:
The TXG tungsten legion grip module is now listed on the Sig store site:
https://www.sigsauer.com/store/p320-x-series-txg-grip-module-assembly.html
link isn't working
-
Has anyone looked at the Legion FCU parts if they are the same as the standard X5 (sear, sear springs etc) ?
-
What is the wait time like on a LimCat
2.JPG.885835e51d48602079758ade5ebc71e3.JPG)
Trigger Pre-Travel
in Open Pistols
Posted
it appears EAA do not have captive half-cock notches