[Dillon powder measure ?]

I never empty mine except to change to a different type.

[Double alpha racer x holster ?]

I got a racer x about six weeks ago and like works well no slop or play have friends that the other two models and mine works just like there’s. It’s the only daa holster I’ve owned, I did get the pad for it and would consider it nessary.

[Thumb rest]

On 8/7/2019 at 8:03 PM, Shmella said:

Pretty much anything except a gogun *thumb rest [generic]*. The guy who trademarked the name is an abomination to shooting sports and an akai or anyone else’s is a much better design anyway. 

Thanks didn’t know that but I do now.

[pistol rest]

I’ve used a leather bag but I seem to have more consistent results with a mtm pistol rest. 

[Thumb rest]

On 8/3/2019 at 5:20 PM, BigBamBoo said:

Shameless plug, I have a new GoGuns opposable in black I would sell cheap.  

Man I just ordered a goguns last week. Got it Saturday and installed it, really like it trying to decide which hole I like the best. Shot it in the rear hole and liked that but didn’t care for the draw in the rear, moved it to the front and like how it fills with the draw but haven’t had a chance the shoot it in the front hole yet.

[Another New Guy from Arizona]

Welcome from hot and humid Ms.

[The scoop on Shooters World Powders]

Thanks for your research on these powders.

[Who makes this bullet?]

On 7/12/2019 at 6:47 PM, Ssanders224 said:

 

It will be priced better. 

That’s good to hear I’ll be able to shoot more lol.

[Who makes this bullet?]

7 hours ago, Ssanders224 said:

I'm 99.9% sure It's the bullet Everglades sales as their "competition style" 125gr.  

The base is what we call a stepped base. It is not a two piece jacket.  PD also uses this style base punch. 

 

PD produced a bullet almost identical to this for a short time earlier this year, and there are some out there in the wild. However, it has since been re-designed and will be available soon. 

Will it be priced the same as the 124 Jhp .

[Online Shooting Prescription Glasses?]

I went with ssp eye ware you can get the reader lens at the top of the lens comes in sets with clear, yellow and dark at a decent price.

[Shadow 2]

I got a s2 a little over a year ago ,shot somewhere around 10k minor rounds Thur it with the same buffer and finally swapped it out with a new one. Gonna just keep using them since it came with some extras.

[CZ Reduced power trigger return spring S2]

I have one with around 10-12 k on it and I just changed it because I had it completely tore down and have heard that this spring didn’t last that long so I changed it. Kinda wondering after reading what George and Matt said if that rumor is true. 

[Need Coated 124’s recommendation]

10 hours ago, Lightfoot said:

 I was running an RCBS 45 seating die and getting weird results.  Depths were off, i even had exposed lead through the coating at the crimp area.......but before the crimp!  I kid you not, the brass still looked like a trumpet and yet there was a shiny ring around the front driving band.  I gave up trying to figure it out.  I don't even care at this point.  I bought a Hornady die and changed nothing else and all my problems have gone away.

Sounds like a seating stem issue wrong stem for the style of bullet you are using.

[Czechmate CMore mount screws loosening, help]

Thanks learn something every day never heard of it.

[Czechmate CMore mount screws loosening, help]

11 hours ago, Matt1 said:

Clean the holes as described. Use shellite to degrease and use a fresh bottle of red loctite


Sent from my iPhone using Tapatalk

What is Shellite might be a auto spell check screw up lol

[Hello from Mississipi]

Welcome from Pearl River co. Ms.

[Most accurate 9mm FMJ?]

 I’ve had some very good groups with the RMRs 124 gr MatchWinner and PD 124 jhp

[115 gr. and Sports Pistol Powder]

I got a 115 gr coated bullet load that I’m using with 3.5 grs sport pistol in a s-2 ,works fine with 11 lb recoil spring. Haven’t tried any other powder charges this load seemed to work good for me.

[Sport Pistol powder]

16 minutes ago, Bmeehan19 said:

All shot out of a Canik TP9SFX. Worth noting the .356 were far more accurate than the .355. The gun seemed pretty dirty after 350 rds. Also really noticeable smoke. The brass had a good smoke streak down the side on about 1/4 of the exterior sidewall. 



I’ve had very similar results, I started shooting 3.2 grs and things start to clean up a little better.

[135 Blue Bullet]

Either one would work but for me I would go with w-231. It would be a personal preference imo.

[Shout out for Vortex Optics]

4 hours ago, ManOnTarget said:

+1 for the Vortex Viper. Have one myself and its never let me down.

What kind of gun and mount are you using the viper with ?

[Sport Pistol powder]

14 hours ago, Darrell said:

Do you have any accuracy data to go with what you tested? Does it shoot a 2" group or 6" group? that is important too.

This is what I got using a ransom rest with the same basic load.

[9mm diameter preferences]

I been shooting acme 147 flat point 356 dia with no leading but there bullet mics out at .3565. I was getting some leading from your .356 dia 147 r/n and they mic out at .356 so I ordered some .357 from y’all and that seems to have stopped  the leading I need to clean my barrel and shoot some more to be 100% sure. I think that would be a good move increasing the dia. By the way I was getting very good groups from both dia. bullets at 25 yards.

[Killed my RMR in 5 days :)]

ClayBuster I would find out what the torque for the plate is supposed to be so that it doesn’t get over torqued.

[Killed my RMR in 5 days :)]

I’m very curious what caused the warped plate what’s to keep the new plate from warping.