philippshen
-
Posts
100 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by philippshen
-
-
10 hours ago, FingerBlaster said:
so is an sp-01 with a czc a bushing legal?
for esp, yes
-
Not an expert, but IMO, the short answer is YES
8.2.1.2 Parts in this list must come factory installed on standard production firearms.
Delta hammer came installed on all Xtreme pistols.
8.2.1 subsection A. Have a minimum annual production of 2,000 units.
I bet they have, globally.
8.2.1 subsection E. 43oz limit.
Difficult, but not impossible. For example: remove grips, use polymer guide rod, remove the rear sight, remove right side safety, drill holes on your mag....
-
23 minutes ago, SmCaudata said:
Yeah, now that I reread it, it does seem funny. I was thinking the heavier gun would handle the reciprocating mass better, but I suppose polymer guns do just fine. Time to get some lighter springs...
Sent from my SM-G935T using Tapatalk
I use 8lb recoil spring from tanfo, it works great
-
-
1 hour ago, EngineerEli said:
What kind of grips are those???
Toni system aluminium grips
-
duotone shadow slide has the blue finish I believe
-
just buy a regular sp01, put a CGW 13lb hammer spring and an RP TRS in it, polish the parts, black rear, and fiber optic front sights, it will be good to go.
-
2 hours ago, OPENB said:
Yeah, I've been messing around with this LimPro for CO. First I broke the Shield/JPoint that was on it, then I broke the cheap Primary Arms green dot that I had laying around. I spent lots of time trying to get S&B primers to fire in DA. Gave up & just use a Federal for the first round. I was told it had a Titan hammer in it when I bought it, but it's a lightweight Hart. A Titan would fix the light strikes. Finally shot a pretty good Monday night match with it last week, then broke a TRS last night. After doing some background, found out this was Twinkie's gun, & she has a video up where she tells Ben she has gone through several TRS. Ben said he's never broken one in a Stock II. It's accurate but a very "experienced" gun & I don't really want to put a lot more money in it. This will probably be my only foray into Tangfos. My open guns are Glock-like compared to this.
My buddy got three Stock2, at first it was problematic with SB, Win, and CCI primer, however after a lot of tweaks, with a combination of PD firing pin, titan hammer, PD 13lb Hammer spring and PD TRS, his gun now run flawlessly. The DA is about 6lb and 2lb SA now, with little to none noticeable stacking. BTW, none of his s2's had TRS problem
.
-
57 minutes ago, OPENB said:
I ordered some PD TRS last night. Hope I can get them before the weekend, we have a classifier match Sunday, & I wanted to get my CO classification. This gun with a Vortex Venom & Taylor Freelance base pads rocks for a carry optics gun.
I broke 2 TRS on my shadow already, always have some backup in your range bag would be handy.
you mentioned classifier match on Sunday, you mean this Sunday in Miamisburg right?
-
-
-
Great review! Thx
-
Nope
Sent from my iPhone using Tapatalk -
this is what u need
-
20 hours ago, MissionaryMike said:
Hard chrome is pretty durable. I've had various cleaners on this finish. The holster wear is a bigger concern than any oil, cleaner, etc...
It looks great! Did you polish it after plating or it came like this?
-
2 hours ago, highhope said:
I tried, not so easy to remove that finish.........
try harder then
I will do this to mine after I got my CZ chromed (hopefully)
-
Xtreme 147gr RN, 3.5gr Prima V, OAL 1.120, CCI SP primer, 15 rounds avg 133PF.
-
10 hours ago, highhope said:
Here is a picture Springer vs Henning. Wish Springer produce silver ones.....
just sand the black finish off, problem solved.
-
I heard CZ/Tanfoglio are popular in Europ while 2011s are popular here in States.
-
I like Springer base pad better because they are thicker and heavier than others
-
thx guys, those look absolutely gorgeous!
-
13 minutes ago, JusticeOfToren said:
Not sure how Limited Pro thread got hijacked into Shadow 2... but I am also looking for a Limited Pro, since it's IDPA SSP legal with the Titan hammer!
Grab one before they run out!
-
10 minutes ago, scffacenter1 said:
I saw that, and is part of the reason I wanted to go ahead and grab one up. Stock IIs are gonna really push that 45oz CO weight limit, the other two should have no trouble.
I think this has been discussed in another topic already, you can build a CO ready stock 2 under 45oz with no problem, or if you want, mill the slide makes it even better.
-
3 minutes ago, scffacenter1 said:
Alright, to follow up on this, is there any difference of the frame from the stock to the stock two? Also what is the difference in a stock and a limited pro besides the slide/barrel length? Just want to make sure all of the parts I have for my stock 2 will fit the stock. Thanks for everyone's help
1Stock v. S2, I might be wrong, but from looking at a pic of stock, I think the trigger guard, grip checking, dust cover and hammer pin are different, parts should fit just fine.
Stock 2 has the bull barrel and full dust cover that Lim Pro don't.
However, I think you may need to know this, a quote from another topic.
On 2/21/2017 at 3:21 PM, PatriotDefense said:The Stock and Lim Pro will no longer be imported..... per my CIA back channel connection at EAA
.
I will do this to mine after I got my CZ chromed (hopefully)
Shadow 2 for carry optic?
in CZ
Posted
Shadow 2, 46.5oz on CZ-USA website.
Carry optic rule, 45oz weight limit.
With CZC slide cut(with rear sight removed), polymer guide rod, lighter grips, can we make shadow2 under 45oz?