bamabound

I am selling my RIA FS Tac 2011 in 40 S&W if anyone has been trying to hunt one of these down...Here is the link to my post.

For the people who swapped out the mag release for the Gun Craft extended. Mine feels really gritty and stuff, what about y'alls? Did y'all cut a coil and try again and smooth some of the edges? Sent from my iPhone using Tapatalk

From what I understand there were two different lengths, a standard length and an extended length. I understand the oversized button just thought there was some sort of extended length that extends the mag release itself and then the button screws into it.

I have the 51782 TAC Ultra FS HC 40 S&W and am wanting to change the sights. For whatever reason my firearm isn't listed on Armscor's website anymore, for reference due to it being similar to the 51679 its listed as having a "LPA MPS1-Type Rear Sight" which is identical to what might is wearing. Would I be able to just change it to any LPA cut type sight...it does have LPA listed on my rear sight. I know some of the other 1911s from Armscor have the "Novak" type sight. Dawson only offers a couple of different options as most of them being fixed and would like to have to luxury of adjustable sights. What have y'all done?

I was just wanting to see a picture of the standard length or the extended length to see if I could skate by with the standard length or for me to wait for the extended lengths to come back. Sent from my iPhone using Tapatalk

Does anyone have the standard length gun craft mag release or a picture of it? Maybe even a extended length but the darn things are elusive..

Haha, no I had a test to study for so, you know priorities...I actually picked up one myself but not the pro match. Got tired of waiting for one as I have been looking at them for a few months. Sent from my iPhone using Tapatalk

I'll try them on the phone tomorrow. Sent from my iPhone using Tapatalk

I was seriously advised to buy a new frame. I haven't even shot it yet. Sent from my iPhone using Tapatalk

Seriously?? Sent from my iPhone using Tapatalk

Picked up my RIA 51782 40 S&W and got home to find this..Let it roll until it gets worse (if it gets worse) or address this with Armscor right off the bat? I had to get it online and didn't break it down in store.. Sent from my iPhone using Tapatalk

What are you guys running recoil spring as far as pounds go. Also wanting to find out about the mag release replacement. This was the only thing I found on Dawson's website and was just a couple of digits off from the one posted by tomjerry1 "511-1044 but I see 511-1042 https://dawsonprecision.com/mag-release-para-hicap-serrated-steel-by-gun-craft/

I figured so, I know every gun is different but just was curious as to what others find.

I see a lot of people who like Black Bullets International but, don't understand as it has been a general rule of thumb for cast bullets to use FMJ diameter +0.001. BBI lists theirs at .400 when according to general rule of thumb should use .401 for coated lead. I had to use all the way up to a .358 projectile for my Glock 34 to get a very nice group. What is your take on this?

How did they run? Sent from my iPhone using Tapatalk

Where might I find that sir? Sent from my iPhone using Tapatalk

I was referring more towards my top finger. Sent from my iPhone using Tapatalk

Do it run factory 40? I don't use anything but 9mm or 45 Sent from my iPhone using Tapatalk

I just picked a Ultra Match up. Ran it like a rented mule for 100 or so rounds, American Eagle 180gr, and it felt good and was reliable. I know 100 reds isn't that much but it was a hard 100. I'm in Oxford and will be at the CMP USPSA matches feel free to shoot mine if your there. Excellent, I pretty much only shoot at CMP so I'd love to try. I have tried Keegans briefly after a match so I didn't get much of a feel for it. I was really looking at the Ultra Match like what you have. Sent from my iPhone using Tapatalk

It's almost like I am forcing my finger to be in the trigger guard. All in all this isn't working for me anymore as I could never shoot Glocks as well as my friends M&P and for a long time contributed some of my groups to me. It looks like finger is coming down at a 45 degree angle not really allowing myself to pull the trigger straight back. Sent from my iPhone using Tapatalk

I am looking for a new gun coming from a Glock 34 and have owned several different Glocks (20,21,19,30s,43,41) and was curious as to how these two specific pistols compare in grip size. My 34 felt like it could have fit better in my hands. I used the back strap with the large beaver tail and still felt like i could have a better fitting gun. The 20/21 frame fit really good in my hands and my finger never from it. I have been looking at the TS and the Elite Limited for a limited gun. I've seen the comments of the Tanfo being bigger in the grip. Of course most of these you have to order online so I would like to get it right the first time. Any input is helpful Sent from my iPhone using Tapatalk

Here is another question, how do y'all do trades or trade plus some cash? Do y'all both send the gun at the same time or one wait for the other one to come in? Sent from my iPhone using Tapatalk

I have an extra tool head too I just went ahead an ordered the whole quick change kit as well as the caliber conversion kit. Going from 9mm to 40 S&W just like you. For like $20 more you get another tool head and a tool head stand vs just buying a powder measure and powder die. I just ordered everything from the Enos store because the shipping is cheaper than what I have been quoted on. Sent from my iPhone using Tapatalk

I wouldn't trust the post office full heartedly a family member of mine works at the post office and has seen other employees not checking IDs when people come to cash money orders. Sent from my iPhone using Tapatalk

I hope I have the same experience which I'm sure I will. Sent from my iPhone using Tapatalk