R34PER
-
Posts
119 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by R34PER
-
-
It stops the trigger from continuing to move reward after the shot breaks.
-
Maximis228: What happens when someone shooting in their state in limited that has been reduced to 10 rounds then goes on to shoot in another state or a major match and is stuck shooting 10 round gear against people running huge stick mags? That hardly seems fair.
BikerBurgess: In order to use Tanfoglio small frame trigger parts. I had to remove the slide mounted decocker lever in order to use the firing pin. It's an external modification and makes it not production legal. That same modification is perfectly legal in Limited 10.
-
I have multiple guns that I would love to compete with, but the only place they are competitive is L-10. Example my IWI Jericho with a trigger job that makes it competetive with other CZ75s, but that trigger job makes it ineligible for Production. However it uses CZ75 mags so there is no way that it can be competitive in regards to capacity in Limited.I prefer major power factor cailbers, but the production 10 round format.
Also, why are Proudction guys so scared of competing with Single Stack?
-
I was watching the latest PowerFactor show youtube upload. They brought up a point that I really agree with. Why not eliminate Production/Single Stack and combine them into Limited 10. That sounds ideal to me. What is everyone else's thoughts?
-
I would suggest either a caliber exchange kit of the same caliber/size or a second gun. That way you can swap parts. If the frame/mag release gets messed up then you can swap it. If the slide/barrel/recoil spring/guide rod get messed up you can swap it. If the fire control unit gets messed up you can swap it. I think you get where I'm going with it. The interchangeablity is one of the beauties of the P320.
-
Get rid of production. That is the real hider division. They won't shoot against guns designed over 100 years ago.
-
That's what I was afraid of. As much as I love the gun 14rnds just isn't competitive in Limited IMO. Especially when compared to my SIG P320 which factory mags hold 14rnds and you can easily get +5 with taylor freelance base pads. Maybe I will run it in Limited 10.
-
I have an IWI Jericho .40sw, which takes CZ75 shadow magazines. I've used my buddy's spare CZ75 shadow 9mm magazines in the gun and they ran reliably. I'm setting it up for limited and only have the two factory mags so far. What CZ75 magazines and base extensions offer the most rounds of .40sw reliably. The Jericho is basically a small frame Tanfo. So as far as I know eaa and ts magazines won't fit. The problem I'm having is all the CZ75 competitor magazine offerings seem to be geared toward production and the only stuff I can find for limited are all TS.
-
Very interesting. Thanks for the info! I can see why you suggested having 3 or so grips to modify, lol. Seems alittle messy for my taste. I'm still trying to figure out a cleaner more purpose made solution. Did Springer say how much modification would be involved?
-
I was wondering if a G20 and G40 would be less flippy than a G35 and G22 because of the weight. The only reason I thought it might not is due to most of the added weight being part of the reciprocating mass of the gun. I have a G29 I carry and love the 10mm. If it would be less flippy I definitely prefer the large frame glocks.
-
I currently have two full size, a compact, and a subcompact grip. I switched between carrrying compact in .357sig and subcompact 9mm. I was planning on making my 9mm fullsize slide and one full size grip into a Production or Production Optics gun, and making my .40sw full slide and the other grip into a limited gun. I was going to order another full grip or two to play around with if necissary.
How much cutting is needed to get it to fit? When you get the stainless attached can you post some pictures of the process and final result?
-
A 1"x1"x3" brass weight machined to clamp on the full size rail would add approx. 14.57 ounces to the grip module. It would also not add to the thickness of the gun. I'd have to see if my friend and I could machine one in his shop. He says brass would be easiest to machine.
I do agree with the P320 being soft shooting already in .40sw. I was at the range today and alternated 9mm and .40 slides shooting 10rounds each time. Both caliber bullets were factory tula steel cased. The .40sw felt flatter/less snappy than the 9mm. A friend of mine had the same observation when he tried.
If the stock magazine holds 14 .40sw and 17 9mm. How many do you think it would hold with the Taylor Freelance mag bases in .40 if your getting 23 rounds of 9mm?
Do you know if the STI magwell fits over the grip? Could you drill a hole where the lanyard loop is and pin the magwell to the grip that way?
-
Here is one set up
http://teamsigsauer.com/sig-sauer-p320-uspsa-limited-production/
I am filling the gap inside the magwell with epoxied in lead and have a magwell on the way that I will attach to a grip frame. He used a tungsten mag well but my first go at this will use aluminum due to cost.
The DAA race master holster now supports the P320 if needed.
I would get a GGI fat guide rod to add some more weight and allow adjustment of the recoil spring.
Lead filled former light could work or get a frame weight like what Tori runs. I would do everything else first as that might not be needed
Yeah, I saw that page. He doesn't say what parts he's using. Where are you getting your mag well or are you having one made special?
I have someone who can make me a tungsten guide rod. The gap inside the Magwell your talking about, are you referring to that the half circle shaped recess up the length of the grip?
Also, is attaching weights to your rail legal in limited. I found something like these online: https://www.deltapdesign.com/accessories/rail-weights/rail-weight-single.html#tab-1
-
Also I forgot to add. Is attaching weight to the grip module allowed in Limited. I heard Bob Vogel uses a lead filled glock light on his glock.
-
Tungsten extended guiderod 1.6 oz
SJC Magwell 8.7 oz
Glock flashlight 8.6 oz
So are attaching things to the rail allowed in limited? I ask because I am thinking of making my P320 configured for limited. Looking for ways to get more non-reciprocating weight.
-
So I'm think about turning my .40sw full slide, one of my full grips, and one of my trigger assemblies into a Limited gun. Looking for input from other who have modified one for limited or at least thought about it, what their opinions/suggestions are.
I was thinking:
Spring Precision 140mm base pads
Gray Guns competition action package
Gray Guns 1911 spring guide rod
Apex flat trigger
Dawson fiber optic sight
Springer Precision large grip tape wrap
I've seen one of the team sig guys with a mag well but cannot find one online.
What is everyone's thoughts? Do you or don't you think a P320 has potential to truly compete in limited, and why?
-
yeah, he sold the accu-shadows and got a stock 2 this year.nasty maskey switched? Thot he was shooting a cz last fall at nats.
Brad engmann I think was shooting an M&P last year.
-
Here is what I have so far for the top 25:
1 Ben Stoeger - Tanfoglio
2 Robert Vogel - Glock
3 Nils Jonasson - Glock
4 Alex Gutt - Tanfoglio
5 JJ Racaza - Tanfoglio
6 Ljubisa Momcilovic - CZ
7 Rob Leatham - Springfield
8 Max Michel Jr. - SIG Sauer
9 Matthew Mink - CZ
10 Casey Reed - CZ
11 Shane Coley - Glock
12 Nick Yanutola - Tanfoglio
13 Elias Frangoulis - ?
14 Shannon Smith - Glock
15 Robin Sebo - CZ
16 Sal Luna - CZ
17 Brad Engmann - ?
18 BJ Norris - Beretta
19 Phil Strader - Glock
20 Frank Garcia - Tanfoglio
21 A.J. Stuart - SIG Sauer
22 Matt Hopkins - CZ
23 Mason Lane - SIG Sauer
24 Russell Maskey - Glock
25 Lee Dotts - CZ
CZ - 7
Glock - 6
Tanfoglio - 5
SIG Sauer - 3
Beretta - 1
Springfield - 1
Anyone know what Brad Engmann or Elias Frangoulis shot?
Part of your list is incorrect. Russell Maskey shoots a Tanfo Stock 2. He's a friend of mine.
All this talk of eliminating divisions...
in USPSA/IPSC Shooting
Posted · Edited by R34PER
I agree, just allow single stack and L10 guns shoot in production and give it Minor and Major scoring. You can even keep the round count difference 8 for major 10 for minor.