Prknives
Members-
Posts
13 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by Prknives
-
Do you guys take the bolt pin out or leave it staked
-
Do you guys take the bolt pin out or leave it staked
-
Took it apart , there did seem to be a slight burn on the part of the spring that was facing towards the muzzle I did notice some long vertical scratches I'll try and post up a pic of them
-
Ok I will check out the spring, I've already polished the tube and I will try some grease I have and hopefully I can test it out before the match tommarow, if not I've got a buddies hk m1 benelli as backup:) thanks
-
I use a thin amount of fireclean, so should I run it dry then? Also I was shooting in 50degree weather if that matters
-
Little update I cleaned it(wasn't that dirty) and took it out tonight, using the same 2 3/4dram ammo I had only two short cycles, the weird thing was that I tried out one of my 4shot 3 1/4 dram shells and it short cycled!
-
Thanks, the barrel was definetly tight, the weird thing was I had shot it the day before with lighter loads and they seemed to cycle ok and anything else I used worked perfectly
-
It was federal, and I've shot that ammo plenty (I shoot on my high school trap team) what was weird was I also tried a 3dram and it still had the same issue
-
Hey has Anyone had cycling issues with their m3000? Was shooting trap tonight and I wouldn't fully cycle any shells back, only enough to eject the shell. I was using federal 2 3/4 dram 7 1/2 shot 1 1/8 ounce. I've used that ammo last week from the same case with no issues. I cleaned it and shot 1 box of remington and some slugs on Sunday and now have this problem. I've had the gun since December and shot atleast 100rds a week since then with no issues. Going to take apart tonight a clean hopefully that solves it.
-
Same here I built one and now I have to make a better one lol it always happens
-
hey guys wanted to throw up a couple pics of my m3000 and what I've done so far, I turned a bolt handle out of steel rod, I plan on making a titanium one to match my bolt release I machined out of a piece of titanium bar. I did some work to the loading port and polished it up tonight,I didn't go to crazy with it just rounded the edge,and to top it off added I a nordic comp +6tube with an moa nut and nordic clamp, hopefully the links to pics work, thanks for checking it out. Oh and its a 28" https://plus.google.com/107278426081714984852/posts/fNT8CXSZWpD https://plus.google.com/107278426081714984852/posts/BTe43PFtWW8 https://plus.google.com/107278426081714984852/posts/ServfpJHiG3 https://plus.google.com/107278426081714984852/posts/KpDRz3563mA https://plus.google.com/107278426081714984852/posts/McYPmd1tSPU
-
No mine is the Moa, Weird I'll have to give him a call , bummed I couldn't let 12 rounds roll on Christmas morning lol
-
Anybody have problems with the Moa precision but fitting in their m3000, got my shotgun today and tried to attach it but could only get about 1 turn on the threads and it would stop , if anyone has some suggestions that would be appreciated thanks