NateTSU
-
Posts
282 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by NateTSU
-
-
I followed the Hodgon load data, use 3.7 gr TG in my 9mm minor and like it. I have several pounds that's why I wanted to test it in my .45. My friend has a crono but he lives 2 hours away so it may be awhile before we get together. I picked up a pound of Clays at my local shop, it was made in Canada and the powder I was using to test was from Australia, load data is the same though.
-
Has anyone seen an X5 on the shelf at a gun store yet? My local shops have full size P320's but I was interested in handling an X5 before I ordered one. I already have a P320 compact and love it, and thought about getting a P320 RX for CO but have heald off buying one. I like what I have read about the X5 already.
-
Thread Revival!
I have been to the range several more times with these two loads,accuracy is about the same. Group sizes have shrank since I got back on my dry fire schedule. The load of 4.1gr of clays has the softer recoil, more of a push where the load of TG is snappy. I haven't chronographed the loads yet but my manual says both will make major PF.
-
Well test loads batch #2 are ready, I kept the Clays load at 4.1 and the Titegroup load I backed down .1 to 5.0. I ran out of brass so the 2nd round of Red Dot will have to wait. I upped the sample size to 25 rounds for Clays and 23 for TG because I ran out of brass. I will test these at the range off a bench/rest instead of out in the pasture. I don't have a chronograph yet but will eventually.
-
Hey guys I'm not writing off any powders from these results, all 3 loads shot well enough to justify further testing with bigger batches. I agree that I need to shoot from a bench to really test accuracy and take the human element out of it.
-
Well I got out and shot today. I shot 3 5 shot groups of all the loads and was pretty happy with the results. The load of Clays was the softest shooting and most accurate at about 2". The load of Titegroup was a close 2nd on accuracy but had the most recoil, it wasn't terrible by any means. The Red Dot load was the least accurate at about a 3" group. Recoil was not far from Clays in my opinion. I will probably go with the clays load. Testing was done at 10yards standing. My pistol ran like a top with these loads, no FTF's or FTE's.
-
Nice setup, I have had several savages and the all shot great. Any plans to reload for this beast?
-
-
Well I loaded some test rounds tonight. I started with 4.1gr Clays 5.1gr Titegroup and 4.6gr of Red Dot Winchester WSP primers and Blazer Brass COAL is 1.258.
-
I didn't make it to the range last weekend, my bullets delivered on Monday. I have my press set up now I just need to make some time to get some loaded up. Hopefully I have time to make it to the range this weekend.
-
Well I have new dies, a shell plate and some 200gr coated SWC coming from Blue Bullets. I have some load data for all three powders, now I have to wait on UPS. Hopefully I can get out to the range this weekend.
-
Thanks Steve, I will give it a try.
-
Thanks for the load data, I will try it. My 1911 is a 5" barrel if that changes anything.
-
I will give red dot a chance first. My brother in law has some clays that I can use for a test batch so I will try that as well. I will also try titegroup with coated bullets as suggested above, I have around 5 lbs left that I use for 9mm so it would be nice to only stock 1 main pistol powder. HS-6 data seems to favor lighter jacketed bullets so I will try that for a JHP load.
-
On February 18, 2017 at 0:28 PM, ben b. said:
Titegroup works fine in.45, but is smokey with lead bullets. Large primer .45 cases are easily found, small primer .45 case are the scourge of .45 reloading. If you enjoy sorting cases, go for it. I hate it and wish small primer .45s weren't ever in my area.
Thanks, am planning to use coated bullets. I am buying large primer brass, that seems to be most commonly available.
-
New 45 loader here, I have several years expirence with other calibers though. The pistol is a Ruger sr1911 and will be used for USPSA SS, falling steel and paper punching. I have a few general questions, first is small primer or large primer brass? Does it really matter? Second is powder choice, I have unique, hs-6, red dot and titegroup. Looks like most people like go for clays or bullseye. Last is bullet choice I was planning on using coated lead, 200gr RN or LSWC. I am buying sample packs of both to test accuracy and reliability. Is there anything else to look out for?
Thanks
Nate
-
Titegroup works well for me too, I have used it with plated and coated 124's and 115 XTP's. It's accurate out of my G34, pretty cheap and I have multiple local sources. There may be "better" powders out there but it's TG for me.
-
I am using a lanolin/alcohol blend for a case lube, it's tacky after loading. Do I need to add more alcohol, or tumble loaded rounds? I shoot coated bullets, will tumbling in corncob media take off the coating?
Thanks
-
Another week of dry fire now and it's clicking, I need some live fire practice before I'm comfortable doing it in a match. Transitions have got faster and my first shot from my draw has got faster. I think the line for me is 10 yards on a partial and 15 on an open target with both eyes open. I hope to move the distance out further with more dry fire and live fire practice to build my confidence.
-
Oh I see, I would want an ar lower that uses standard mags so I could swap uppers.
-
I sure will NOMORE606. For curiosity sakes where did you purchase yours from? I see them online at BenStogers and Patriot Defense but that's about the only place I have found them.
-
I wonder if reliability issues are related to variations in ammo from commercial suppliers and poor QC from some surplus ammo. If it ran reliably it would be a cool and cheap alternative to the 300 for non reloaders.
-
11 hours ago, GregSmith said:
No, I don't reload. I've shot a suppressed .300 BO a few times. I would love to have one. What buffer you using? Twist on the barrel?
My friend is using a factory carbine buffer with a adjustable gas block and a 8 or 9" barrel I don't remember exactly. I think there are a few company's making remans for the 300 now.
Has anyone thought of building a 7.62x39 SBR? Ammo would be super cheap and ballisticly similar to the 300. That could be a good alternative to non reloaders.
-
Sounds good, l see mostly 2011's and cz's never a stock 2.
1911 FTF
in 1911-style Pistols
Posted
Good evening evryone, I am having some trouble with my 1911. I am getting failure to feeds fairly regularly. The gun is a Ruger SR1911 that I have about 300 rounds through. Mags are factory Ruger and 3 MecGar 8 round mags. The rounds nose diving in the mags, slipping forward on the first round and jamming into the top of the barrel when the slide is returning to battery. The bullets have a pretty bad gouge that deforms the nose and breaks through the coating. Bullet is a 200gr SWC loaded to 1.225. The MecGar mags fit looser and have more play up and down than the factory Ruger ones. This is my first 1911 and I am.not sure how to fix this problem, any help is appreciated.