-
Posts
315 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by eboadway
-
-
That must have been enjoyable both times it happened.
-
I looked at putting the VZ CZ grips on a Stock II. Not even close.
-
-
I temporarily put a Dawson CZ front sight on a Stock 2. The width was okay but it was shorter lengthwise - didn't go all the way in.
-
Delta required a small bit of fitting, but not much.
-
They now list the .140x.100 on their website!The only thing that I don't like about the Dawson is that it's too tall. The OEM sight is 0.140" tall. The shortest Dawson is 0.160", so that makes you have to jack up the rear sight to zero it. That's why so many Stock IIs have the rear sight sticking up in the air. I've asked for a 0.140" X 0.100 sight. We'll see if they make it.....
-
I found 3.1g to give a consistent 128 pf, so 3.2 should be close to 130.
-
-
I use a coffee mug.
-
I have a "Match Day" list in my "Reminders" on the phone. Same with "Range Day" and "Shooting Needs".
-
I've removed 2-piece sears and replaced them with 1-piece, but now I want to reassemble a 2-piece and it's giving me fits. Any tips? Use the Q-Tip shaft to hold the sear spring then push the other piece up from underneath? Thanks...
-
I have a blade tech holster for a Sig P320 and the Stock 2 fits perfectly in it, better than the actual blade tech holster for the stock 2
Hey thanks for the advice. My 320 holster works great!
Ed
-
At least my one DQ is out of the way now.
That attitude may get you DQ'd again in the future!
-
I like them a lot, coming from 147's though. They seem to track better, albeit with a small bit of "push".
-
I just picked up some 135g Bayou's. With 3.2g TG they barely make minor (not surprising). 3.4 should give you enough of a margin...
OAL is 1.13.
-
Disco is the disconnector. It may have one wing or two - these are the "ears" that protrude from the side(s).
-
It somewhat fit in my Shadow holster, but there was a bit of play. I eventually bought a dedicated holster...
-
You really learn to appreciate any free time you have, something I took for granted all those years. Baby's asleep? Quick, load 200 rounds on the Dillon!
-
It's all single action after the first shot.
-
You can enlarge the hole to the required dimension in about 2 minutes with a Dremel. I've done 3 now...
-
I've fit three, and only one required minor sanding on the bottom. The others were a nice, snug fit.
-
Nice site, but their prices are considerably higher than others. I hope the $87 slide stop is a typo!
-
No more than $600
You can get a new one for $610. http://oakhillguns.com/pistol/cz-usa/czu-cz75-sp-01-9mm-dck-18rd-ns-2040.html
-
The dollar is strong against the Euro right now. Eric's shop is at: http://www.ericgrauffelonlineshop.com/en/
LRA has stuff too: http://www.lastroundarmament.com/product-category/ar-m4-parts/handgun-parts/tanfoglioeaa-parts/eric-grauffel-designs/
Tanfoglio Porn
in Tanfoglio (EAA / IFG)
Posted · Edited by eboadway
Edited