-
Posts
315 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by eboadway
-
-
I'm selling my .40, low round count.
-
Oh I see, the EAA sight doesn't show a separate part number for the base plate, just the entire magazine. Can you glue it back together?
-
Centerfire Guns just had them listed at $868 with free shipping, but sold out now.
-
You must manually lower the hammer. Be careful and go slow. Some use the two-finger "pinch" method, some put their thumb under the hammer and roll it forward. It's very easy and nothing to be afraid of, just go slow and be deliberate.
-
I use Shockbottle base pads from BSPS, but the new Hennings are less expensive and look nice! If you want a plastic one as a replacement just PM me.
Link: http://benstoegerproshop.com/gun-parts/eaa-tanfoglio/basepads/
-
Picked one up for $855.
-
Thicker trigger guard and the old "heart shaped" hammer is replaced with what looks like a heavier version.
-
I just bought a set of DAA racers and really like them. Previously, I was using the ghost 360 pouches which worked good as well. If I had to do it all over, I would go with the racers even though they cost a few dollars more per pouch. I like the minimalist hanger of the racers as compared to the bulky hanger on the ghost. The racer allows your outer belt to still make contact with the inner. You have to attach Velcro patches to the back of the ghost hangers, otherwise, one side of your outer belt won't have contact with the inner if you're running 4-5 pouches.
I agree with this wise sage. I replaced my Ghost pouches (bullets out) with the Racers. They save a lot of space and are adjustable.
-
I use the new Dawson .140 front sight which allows the rear sight to be a lot lower with 147's.
-
They are very compatible. Just put in CGW trs, sear spring and firing pin spring as plunger spring, 13# hammer spring and did the usual polishing. Trigger pull went from 11/5.5 to 7/3.5. Not bad!
-
I load Xtreme 147 and 165 at 1.15.
-
http://www.cdnnsports.com/eaa-sar-k2p-9mm.html#.VrOrB9F-zCQ
That would get you in the door on the cheap.
Mine should be arriving on Monday from Gunbuyer.com. $249
-
It came with an EGD trigger? Pics I've seen did not... Bigger mag release too?
Edit - one pic on Oakhill has a regular trigger, one has the EGD.
-
I replaced the CZ pin with the Canik one. In my Stock II it was a nice, snug fit as opposed to the loose fit of the CZ.
-
Thanks for the app!
-
From what I have read the Ghost 360s are junk which is probably why you are moving on.
Really disagree with this. Yes, the width is the same bullets out or forward, but I've found them to be a solid, affordable choice.
-
I have bought from Last Round as well, but they've been out of stock on many items for a while...
-
I've been getting parts from Grauffel in France. With a favorable exchange rate you can save some money, although you will have longer shipping times.
Stock sear: http://www.ericgrauffelonlineshop.com/en/frame-parts/46-sear-lever.html
Xtreme: http://www.ericgrauffelonlineshop.com/en/frame-parts/348-sear-lever.html
-
I like it. Send your results as a text or email, nicely formatted.
-
My stock II's, serial # MT15xxx vs. MT18xxx have a few differences.
Newer model has:
More aggressive checkering
Shorter barrel
Different hammer(heavier, not heart-shaped)
LPA, fully serrated rear sight (older one only partially serrated, not LPA)
No deal-breakers, just some interesting changes. I got the second one for $855 so I'm not complaining. -
But it won't fit the box with the Gold ambi-safeties.It is on the production gun list
-
CZ 75 sp01
in CZ
Yes.
-
My Henning order took a week, and a CGW order (3 day priority) is now at 8 days. Must be the holidays.
-
If you read a little further to page 208, it's fully explained.
Stock II hammer catches at half cocked
in Tanfoglio (EAA / IFG)
Posted · Edited by eboadway
If I bought a used Stock II, I'd replace the hammer, sear, recoil spring, hammer spring and TRS. Better to start fresh...