YellowShooter
-
Posts
222 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by YellowShooter
-
-
10 hours ago, RacerX1166 said:
4 months is a fantastic lead time...I just waited that long just to have my slide replaced...
Absolutely!
i just want it now lol
-
Are you marking because you are shooting 38SC?
-
5 hours ago, clw42 said:
That's not terrible.
It is when you are waiting for it
-
1 hour ago, waktasz said:
That thing is going to be extremely heavy. I like a heavy gun. I have a Cheely Limited gun with the XWF frame and bull barrel, but a hybrid bull barrel, comp, mount, thumb rest and optic will make that thing a real tank. I bet it weighs close to 70 oz empty when it's done.
Yeah... I think will definitely develop some muscle after wielding this thing
Did I mentioned that I also have a Brass magwell lol
-
3 hours ago, clw42 said:
What's the expected lead time?
Sad to report, I think CJ said about 4 months...
-
Quick update on the project!
All parts are in, now the wait begins... =(
Made some last min changes,
5" Hybrid Bull Barrel
picked up some DP 124 JHP and some HS-6 to go with it.
Probably will start a 8 grains at 1.150
-
MBX Cause they just f'ing work
-
Glad to have found this thread!
When you guys measure the bullet with a JHP, do you guys measure from the flat. of the rim to the flat of the JHP?
Or do I need to use something like the Hornady Comparator that measure from the ogive.
I need to develop a load that would work for both these guns using: HS-6 and DP 124 JHP.
- Open 2011 middy, with 3 port comp and two 3/16 poppel holes
- CZ CM Factory
Thanks!
-
5 hours ago, Hi-Power Jack said:
The obvious choice : YELLOW.
It did cross my mind!
Last time I did that with a CZ TS... It cam back a very ghetto blaster
-
Thank you guys!
After mucho consideration... I will swap the barrel to a 5" Hybrid.
Interesting, never even considered Atlas to get me a slide, I was going to wait for a Caspian or STI.
CANT WAIT FOR THIS!
In the meantime... I guess I can start thinking of color schemes... I have too many black and red gun... need to switch it up!
-
Alright here goes!
I having a new open gun build by Sky Customs, the owner CJ is a very friendly and knowledgeable guy!
This will be my first open gun, never even shot one, what I do have is a 2011 sight tracker built last year using mostly Infinity parts on a CK Frame.
All recommendations and comments a welcome!
Here is what I plan on getting:
Full size Cheely Heavy Open Frame with a Cheely E2 Aggresive Grip
Slide is up in the air right now as most ppl I do business with are out of stock.
5.4 Bull Barrel is also out of stock and it will be fitted with a Binary Engineering 3 port Ti Comp, I do have the comp.
Will run an RTS2 on a Wheely Mount, right next to it we will have a DAA Thumb Rest.
I picked the Extreme ignition kit and I will be rocking a Everglades Short Trigger, and for safety I will have the Double Tap shielded thingy.
The rest is pretty standard.
As I said before, this will be my first over open gun, I do plan on reloading for it, probably 124gr with some VV N320 or something
Again, any comments are welcome at this point =)
-
I liked the way it shot best, tried a bunch and got the best double tap groups with a 10lb. Also I ran browning high power Wolff variable springs.
Thanks!
-
10lb spring worked best for me in my 9mm with 130pf 125 grain.
Could you elaborate your methodology in determining that?
-
Yea... Dont really thought this through LOL
Ended up ordering a 11 and a 12# recoil, let's start with this!
-
Can anyone talk to me about this?
I am good with my current trigger pull weight and it is fairly smooth, my main objective is to reduce the slide force when it get back into battery for a flatter gun and faster subsequent shoots, will mainly use 115gr WWB or Federal.
Thanks!
-
I got a call from Optics Planet... asking if i wanted to wait or get something else.
They told me it will be release on 06/30...
Let's hope its true!
-
Looks cool!!!!
-
What is the issue that these have w Hiperfires?
Called them up... Apparently it makes the trigger unsafe, aka will fire on safe.
I end up with the Strike Industries switch kit ($40) + the Strike Industries 55/45 lever ($15), works good with the Hiperfire 24C.
Only down side is the lever kit are polymers... But you gets 10 on them to try on.
-
Yes, and No lol
I have the BB version, I just want to shoot a some steel with a 22 and practice certain skills on top of recoil management.
-
I have amassed a large qut of 22s since the drought!
Is there a 22 out there that would serve me as a good trainer for my tac sports?
-
Thanks guys!
My main concern is using this in conjunction with the Hiperfire 24C and a Standard Lower...
So is there a 60 or 45 for this kit?
-
Alright guys...
I used to have the standard magpul grip on my spike tactical coupled with a B.A.D.A.S.S selector from battle arms.
Recently I have changed the grip to one with a steeper angle... Now hitting the whole 90 degree is slightly less confortable...
What option do I have for a 60 safety lever that will work with a hiperfire 24C?
My lower is a standard Spike Tactical.
Thanks!
-
Those are the one!
Which VZ did you tested ??I just got the VZ grips! minor modification to fit a TS with a magwell =)
Slightly thicker then the aluminum czc but thinner then the wooden ones and rubber ones from the factory. Not that aggresive!
The Diamondbacks are very aggressive
Mj
-
I just got the VZ grips! minor modification to fit a TS with a magwell =)
Slightly thicker then the aluminum czc but thinner then the wooden ones and rubber ones from the factory. Not that aggresive!
Match Open Gun Maintenance Schedule
in General Gunsmithing
Posted
Hey Gang!
Anyone has a good maintenance schedule?
Like, Mag Spring every X rounds
Main Spring every Y rounds
etc etc
Thanks!