sheepdog566
-
Posts
239 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by sheepdog566
-
-
Haven’t heard any discussion on drum magazines. Are they not used because they are a little bulky.
how bout this
https://gunmagwarehouse.com/kci-glock-9mm-50-round-drum-magazine.html
-
Just getting started in pcc. Is anyone using the mbx mini or mega extensions? Had good luck with mbx 2011 mags.
-
SJC recommends CR Speed with their frame weight. Requires minor fitting.
-
Looking for a new uspsa rig.
-
KKM barrel...think I need to go with a different bullet. Acme bullets appear to have a different taper to the nose
-
Loaded to 1.135 and still getting some ftf’s when hand cycling. 1-2 per mag....I can tap the bottom of magazine hard when I get the malfunction and sometimes the gun will go into battery. Inspected the at fault rounds and can’t see anything abnormal.
-
Started out at 1.135...they loaded a bit tight in the mag and still had malfunctions.
-
All the round passed ...running 15 pound spring
-
Any clues what may be causing this with my reloads. Not occurring with all rounds and factory loaded ammo feeds fine. 180grain acme with 4.6 wst loaded to 1.125oal
-
1 hour ago, drivenagain said:
Did you polish the Zev connector, i overpolished mine and had the same issue.
No haven’t touched it. Zev kit with 4 pound striker spring and stock striker.
-
Ordered the fulcrum kit minus striker. Wasn’t real happy with it compared to my dk trigger. I ordered the zev striker hoping it will improve the kit. It should be here tomorrow.
-
Wish I would of went that route. Not impressed with my zev
-
I just installed a zev...was working fine dry fire then next day it started firing on trigger reset. Changed out the connector and it’s back to working order. Not real impressed so far.
-
Glock porn
in Glock
I did the silicone carbide texture
-
Still haven’t shot my zev but thought it was ready to go, all worked fine...just picked it up and now it is firing on reset. Pin the trigger back, cycle the slide, and striker drops when I release the trigger. Stock striker with zev trigger and springs....should of ordered a dk and I wouldn’t of had this problem.
-
Got my zev installed. Been playing with it but no rounds down range. Can definitely tell the difference between it and the DK in my other guns. The DK is lighter and more crisp. Worried about light primer strikes with the lighter striker spring so I’m going to order the zev extended lightened striker. Might try the mod Jonny glock has in his video above when he talks about taking some metal off the downward leg of striker. Like the wider trigger shoe though in the zev.
-
Glock porn
in Glock
Done!
-
Glock porn
in Glock
Shipment from shooters connection came in....ready to build ?
-
I went with zev because I wanted a different trigger shoe, flat or wide. Most of the flat trigger shoes I see are reserved for tactical guns. Nobody is doing one with adjustable pre travel and over travel.
-
I've got a dk triggers in both my 34 and 35. Lighter trigger pull with reduction in pretravel and over travel. I can achieve similar trigger weight with a polishing and spring kit. Not sure I notice the pretravel over travel adjustments when I shoot fast. I just ordered a zev kit, mainly due to the wider trigger shoe.
-
Apparently you cannot buy the shell stop. You have to send your gun to briley for install
-
Maybe the unit briley is making
-
On 9/15/2017 at 4:23 PM, sigsauerfan said:
get the zen with the comp spring kit and the V4 connector. then, you can rework the trigger unit. ask me how i know, i have 2.1 lbs trigger break on my G17 and 2.6 on my G35. none of them have a rolling break.glass break is the best way to describe the trigger feel.
OK...how
-
Like the feel of the wider faced triggers, similar to the zev. And I want to try something new ?
Magwell question
in Pistol Caliber Carbine
Posted
How does one get one of those?