Jump to content
Brian Enos's Forums... Maku mozo!

b18prl

Classifieds
  • Posts

    214
  • Joined

  • Last visited

Posts posted by b18prl

  1.  

    I use Autocomp.  What I found to work best is to start with a low charge weight and work up. There is a transition where things just get harsher, without improvements to dot tracking.  This isn't the case with all powders but was with Autocomp in my experience.  So it's good to make sure you've found the sweet spot. What PF is the Autocomp charge? 


    Jared,
    You're right on! I used 7.3 gr of WAC and was making 172-173pf then I tried 7.5 and got 175pf but felt harsher than 7.3gr.
    I'm thinking about putting some barrel holes for 3N38?


    Sent from my iPhone using Tapatalk
  2. I've got CFD comps in-stock, should you be interested.  Following the link to my vendor section/website.


    Jared,
    I re-barreled my 9 major to .38 with your comp, 5.4" KMM barrel with no holes in the barrel. Tried it with PD 124gr JHP and 9.0 gr of 3N38 chrono at 174xxx pf but the dot is dipping so I tried with 7.3 gr of Autocomp and found it's flippy but dot tracks nicer than 3N38!! What gives?


    Sent from my iPhone using Tapatalk
  3. oh, also, for the GMR-13, is there any sort of extended mag release for it? It take me a while to find it and that would waste a lot of time on stages with reloads especially classifiers.

     


    I need one too, let me know if you can find one. Stock one kinda flat and heavy.


    Sent from my iPhone using Tapatalk
  4. I load from my 33 round with Taylor Freelance +10. I'll have one or two reloads on the belt that have taran tactical basepads. Just using my ghost pouches from my production rig. I'll move one closer to the front. But pretty standard other than that.


    Thats what I'm thinking too, start with the 31 mag +10 extension and have two 22 rounds mags on the belt.


    Sent from my iPhone using Tapatalk
×
×
  • Create New...