b18prl
-
Posts
214 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by b18prl
-
-
I loaded 9.6 under PD 124gr JHP .38SC and got 170
Sent from my iPhone using Tapatalk -
Thanks guys! Just ordered some last night
Sent from my iPhone using Tapatalk -
I felt that to in my .38 super gun after 200s rounds had to clean it and ok after that.
Sent from my iPhone using Tapatalk -
Never tried it with 9 major though. I'm getting another gun built and will be 9 major. Just wanna see if it's optimum with 9 major.
Sent from my iPhone using Tapatalk -
I loaded 9.6gr with .38 Sc around 1375 fps and felt pretty good [emoji4]
Sent from my iPhone using Tapatalk -
How abrasive is it? Running 9major/.38super with it?
Sent from my iPhone using Tapatalk
-
Thanks for the info! I'm picking up some old stock 4756 from a retired local GM here in Orlando and will try it.
-
I only use 3n38 for .38 super and WAC for 9 major
Sent from my iPhone using Tapatalk -
I really liked SR4756 in 38super and was a little bummed when they stopped making it. I read that Chris Hodgdon said something about ww572 being a replacement for it, and I got a pound of ww572 to try but right off the bat they are obviously different - one is a flake, the other a ball and the density is quite different. I haven't developed any loads with ww572 yet but physically it looks a lot like the silhouette/HS-6/WAC/CFE family of powders. When I get off my PCC kick and get back into open I was going to work up a load and compare to similar 38 super rounds loaded with SR4756.
What's your .38 load with 4756 if you don't mind me asking?
Sent from my iPhone using Tapatalk -
Yeah I've been using it for about a year now (when I started shooting open) and I think it works well though I really haven't tried anything else besides doing a work up of HS-6 which I didn't like. I'm thinking about trying Silhouette when I run out of my last 8# keg.
My load is 7.3gn 572, WSP, 124gn MG JHP, 1.165 OAL which makes 172 PF.
Thanks for the info! I have some 4756 to try which I believe is the same as Win 572
Sent from my iPhone using Tapatalk -
Anybody tried Win 572?
Sent from my iPhone using Tapatalk -
6-48
Sent from my iPhone using Tapatalk -
.
More likely slamming the round in harder.
Ammo can be too long (fixed by reaming) or too fat. Reaming the led longer won't fix that!
I was thinking something like primer flow like in open gun case by looking at his picture but his was by firing pin dragging it.
Sent from my iPhone using Tapatalk -
On 5/11/2017 at 10:22 PM, SoCalShooter69 said:
He took the bolo out and was still getting light hits. I will say I'm surprised it still occurred w the PD 14#. Yet moved to a lighter firing pin and it went away? Something isn't adding up. Esp since using the EG light spring. He literally went to lighter firing pin and spring and it cured the light strikes. That goes against pretty much every single persons experience here when tuning these.
Sounds like he went with heavier recoil spring too. Delay the barrel unlocking just a bit.
-
Gotcha! Thank you for clarification.
Sent from my iPhone using Tapatalk -
Not the standard X5 model. Posted on Page 12:
http://forums.brianenos.com/index.php?/topic/244144-p320-x5-thread/&do=findComment&comment=2769293
Thanks though but can't click on that link.
Sent from my iPhone using Tapatalk -
So is it going to be IPSC legal? I'm going to shoot a L3 IPSC match in Thailand this December.
Sent from my iPhone using Tapatalk -
Jack,
We have met before! Please my regard to your wife Pat for me too. Hope all is well!
I have some left over loaded 9 major before I switched to .38 super.
Sent from my iPhone using Tapatalk -
Jack,
If you happen to make it to the match here in Orlando on the 3rd Sunday, I am more happy to let you shoot my ammo I have enough for you to shoot a whole match with. 124gr PD JHP with 7.3gr WAC 1.175"
PD is good enough! Heck I won B at Hurricane National last year with it!!
Sent from my iPhone using Tapatalk -
Let me know in a week when you decide to sell it.
I'll trade it with your Akai!
Sent from my iPhone using Tapatalk -
Ordering the "3 pack" gets them down to you $32 each. Be sure to get the 17 versus the 10 rounders.
http://www.quanticotactical.com/asp/itemDetail.asp?dispItemNum=3828&type=C&subCatNum=36&CMN=Pistol
Thank you sir!!
Sent from my iPhone using Tapatalk -
Where is the best place to buy some 17 rounds mag?
Sent from my iPhone using Tapatalk -
Thanks but no thanks!! Just kidding...
All kidding asides I just bought one off the Gunbroker! Lol
Thank you for your help sir!
I hope it tracks well like the full size.
Sent from my iPhone using Tapatalk -
How is the X5 slide lock release? Same position as the full size P320? I had the full size for a little bit and sold it since my thumb kept hitting the slide lock release. If it's not in the way like the full size I might take a hard look at it again.
Thanks
Sent from my iPhone using Tapatalk
140 mm SV magazine recipe
in Open Pistols
Posted
I used Dawson Para base pad too with MBX 13 coils spring and TTI follower got me 27 of 9mm