-
Posts
349 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by CraigS.
-
-
+ 1 for Brasso
-
I have and use the safariland case it fits perfectly in my 1750 pelican,
i also have a voo-doo tactical case same case but has two more outside pouches.
I checked my safariland case and found a voo-doo tactical tag sewen inside.
the only issue is the weight is 50 lbs when used inside the pelican case with a 20" rifle 21" shotgun and 2011 handgun
and a couple of rifle mags.
the quality seems to be good.
-
You can call Robert direct, here's the link with his phone # http://www.randrtargets.com/
-
Another possibility could be gas block and port misalignment ,
which in effect could be restricting the gas pressure and cause this problem.
-
Jason - If its fesible after the match, let the shooters practice on the long range targets.
we do this at the albany match.
The people who can't hit the targets appreciate the help and after they hit the targets they
know it is not impossible.
you might try keeping the targets within 200yds for a few matches then each month
start inching them out further.
Stick with the 100% for the stage winner it keeps the scores closer in the end.
See you in July, Craig
-
Jeff-
You should come out to tri-county gun club in sherwood on the 4th sunday
of the month, they hold a tactical 3-gun match with pistol caliber carbine.
But the best Multi-gun in the area is at Albany rifle and pistol gun club
it is run by robert of R&R Targets (a forum dealer) call him if you have any questions or want to come out.
Craig
-
Double tap it if you can and use heavy bullets 147.
-
Got the new album Black Gives Way to Blue a while back when it first came out back in late Sept sometime.
I listened to it a few more times these past few weeks while coming and going to Thailand.
Really digging it. You can tell Layne isnt there, but its not bad. Not like when Van Halen put Gary Cherone in there...
Glad to have Chains back.
If you can go see them live do It !
I went last Saturday to see them 2/6/10 I could not believe how good they are with
William Duvall as the lead vocalist.
It was a great show . Check out you tube for the concert footage (AIC @Oregon armory)
Craig
-
What is the name of the hotel in Parma that will accept ammo shipments prior to the match? Thanks.
The only motel in Parma is the court motel.
-
If you have a 10/22 you want to convert, Cactus tactical in the vendors section
has the nordic kit for $159.99 best price I have found,
and then search the classified for deals on stocks, forends and grips.
I think the best part of using the 10/22 is the magazine loader made by Butler Creek
You will spend more time shooting and no more sore fingers from loading
you dont even have to touch the ammo!
The S&W .22 AR is very light weight and might be a better choice
but you will have to buy new mags for about $20 ea.
Craig
-
Nice job, looks great! how about some pics showing the rest of it.
-
I use Brassman sales.com they have 55gr hornadys in stock and are in the Enos vendors section.
good prices , service and quick delivery.
Craig
-
After removing the trigger group assembly just punch out the roll pin in the receiver that the carrier release pivots on and be careful not to lose the spring.
The hard part will be clamping it and locating the center of the pin to drill and tap the screw hole.
-
I take it that you have a factory ghost ring sight if so, a 7/32 automotive ignition wrench will work.
the actual measurement is .216
Hope this is the info you need.
Craig
-
Chris - I had an issue with a tr-21 with a loose lense. I sent it back twice to correct the problem.
They did end up sending me a new scope in the end.
But I have to say that I was satisfied with their customer service and I received several calls from Trijicon too make sure I was happy.
I would expect you will be treated the same way.
Craig
-
Earl, it doesn't matter what the bullet weight is as long as it is on the minor PF floor(minimum), for USPSA matches, and maybe xm193 for the other matches, since there is no PF.
I do think a bolt gun with calibrated ammo is the way to go, to verify the target is set properly.
Trapr
Any reason not to just use the 9mm that is used for every other steel target?
How can you duplicate the energy of a 55gr exactly, and at various distances out to 400yds with a 9mm ?
seems to me it would make more sense to use the same bullet the target is intended for.
-
If you want to load flat base bullets just hold the bullet until it reach's the base of the die
and just go slow enough not to pinch your fingers.
I use the rt1200 on all my rifle brass, the edge is left square
but you will not find any burrs on the case neck.
This trimmer is a big time saver I would highly reccomend it.
-
RaymondMillbrae - You didn't mention if your shooting pardner let you shoot his M2, try it and some other makes
thats the only way you will know what is right for you.
-
Take it from a NorthWest resident , use water proofing spray on everything that's not made with Goretex.
-
I did get to RO this match and shoot it for the first time.
Mark Lipp the director and his staff and the other RO's that arrived early were very friendly and
helpful with any questions or concerns.
The format was different with the scoring and rules but, so are the three other matches
I compete in monthly as well as nationaly, you just make sure you understand them before you start
and take that mindset.
The stages were challenging and the prize table was very nice, even though I did not walk it
I did recieve a goodie bag from the NRA as thanks for volunteering my time.
and they had a B-B-Q lunch as well, not bad for only $35 ! wish more matches were like this!
I'd be happy to do it again! what ever it takes to promote muti-gun and getting more people out shooting.
Thanks, Chuck & Everett well done !
I had a great time , Craig S.
-
I can't understand why the power ring would be marked for anything between 1 and 4 if it is completely blury ???????
sounds like there is a problem with the scope or it should not be marked with anything but 1 and 4.
-
I tried one out this week too, first thing I noticed was the ammo length at 2.250 was difficult to load normally
the bullet tips kept hanging up on the front of the mag, but would just barely fit.
It was very tight getting the 42rd in the mag and would not strip out the first round when in the rifle
and once I down loaded to 41 the mag ran with zero problems.
and I did check to see if the finish was coming off, but I could not find any problems .
I think for me it would be great at using for a mono pod .
Seems like a well built product for a reasonable price.
Craig
-
Harris Bi-pod 6-9" with the aluminun foot pads by bruce Piatt.
Switching to open Bill ?
Craig
-
Pat,
I might be mistaken (what else is new) but #1 sure looks like Craig Salmon...
If I only owned a so-com I might believe it myself.
Craig Salman
Ramshot Tac
in Rifle/Shotgun
Posted
Just wondering what velocity are your rounds going?
Iam guessing <2600