Jump to content
Brian Enos's Forums... Maku mozo!

partyboy424

Classifieds
  • Posts

    341
  • Joined

  • Last visited

Profile Information

  • Real Name
    Kevin

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

partyboy424's Achievements

Finally read the FAQs

Finally read the FAQs (3/11)

  1. All the striker assemblies are the same for all the full-size guns. Do yourself a favor and get a reduced power striker spring. I have a rival s thread a couple posts down.
  2. Aside from an empty mag holding the bolt open like normal. When loaded with an extended magazine that doesn’t sit flush. Like one of my TTI basepads. The mags do overinsert and the bolt won’t close. I always load up on a closed bolt then rack it. If I had to do a course with prone of something where the magazine would be against the ground or a table and could over insert. I would use a stock 23 round mag that has the sleeve which prevents over insertion.
  3. Just posting a useless update since I saw this thread update. I had zero issues with the stock mag release and have zero issues with the DisDef mag release… I was talking to them a while ago and they were debating making a mag release that also fixed the over insertion issue, but haven’t heard from them since.
  4. Awesome, yeah he does great work. Going to have to see if he can make some M&P grips..
  5. Yeah the rumor mill from my dealer is that the revised model will only come in Darkside. But even he hasn’t heard anything new in at least a month.
  6. Had the same thing happen at a match in the beginning of the year. My M&P’s SCS loosened up big time. Didn’t figure out until I went to turn it off after the last stage. 4 stages of everyone watching me miss everything.
  7. I will buy that chrome barrel off of you..
  8. I ran one in a couple competitions. Zero issues, it’s a great little gun and I may like the pistol grip reload better than a detached mag reload. Probably since I do so much pistol training. The only issue is that mine at least has an over insertion issue. If you insert a magazine on an open bolt then it will overinsert. For my matches I always drop the bolt, load the mag then charge it. Haven’t had to do any prone shooting but that would definitely cause a jam if I did. I don’t use the spacers since I use mag extensions. Just picked up the SW Response because I want to use a magnifier in PCSL matches (fpc rail doesn’t go back far enough) and it does not have the over insertion issue.
  9. what springs from my initial couple posts are you running in these two guns?
  10. I imagine you started doing the CZ cut spring from my thread. Been about 5,000 rounds since I made that and still running flawless. Don’t go back to the stock extractor spring…
  11. No I talked to him about it, this is a side little passion project for him. Said the exposure of websites and instagrams would turn it into a job. Shoot me a PM I believe he sent me an extra medium a while back with the edge grip. I’ll send it over to you.
  12. Sorry, been on vacation and not checking posts. If you’ve tried all my spring recommendations (specifically the lightened striker spring and CZ extractor spring) and are still getting light strikes. It could be your actual firing pin. On mine, after a couple thousand rounds, I realized that the firing pin is still making a little bit of contact with the striker block. And you can see the metal peening over on the firing pin. Just a couple quick swipes with a file and you’re good to go. It won’t affect safety, it’s literally just a hair that is enough to cause an out of battery regardless of spring combo. I won’t be back until next week, but I can make a quick video then or what I’m talking about. for the guide Rod, I believe I posted it a couple posts down in this thread. Just a basic Glock 17 Rod.
  13. I had the same issue with a W74 rod in my Rival S. I would have to remove the striker. Looking at the barrel, the lug was chewed up. Not sure at all how that guide Rod does it, but I immediately stopped using it. No issues since.
  14. The Rival S is 17 pounds recoil spring. Can’t remember where I first saw that answer, but I have everything from 14-18 pound springs and it performs exactly between the 16 and 18 pound springs. It’s no where near a 19 pound.
×
×
  • Create New...