Tom Freeman
-
Posts
1,461 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Tom Freeman
-
-
I had this happen on one of my Sportsmans Team Challenge rifles. It happened twice in one match. It was a new aftermarket bolt.
Finally narrowed it down to where the underside bolt and breechface come together was a touch sharp. If the round being fed in didnt rise up enough the bolt caught the very top of the case, made it nosedive, and then lit off the primer.
I rolled off the edges on the breechface and cleaned the gunk from the mags so they feed better/smoother/faster.
No problems since.
-
My 1100 was ordered mid Oct. Just showed up. So basically 4 months.
-
If I wasnt running a Regional Championship that next weekend in Pueblo, I would love to come up.
-
You can buy a complete die/rod combo. It took me a try or two before the guy at Dillon understood what I was trying to explain.
-
I ordered mine mid Oct. Still nothing.
-
On 1/12/2021 at 5:34 PM, Atlasguy321 said:
Any ideas?
Any particular headstamp not chambering?
What bullets are you using?
What is the OAL of the brass?
-
I changed the shape of my firing pin tips from round to a more pointed tip.
Worked for me.
-
The Sierra 142 is a easy bullet to load and it has a pretty good BC.
Yes, H4350 is the tectbook solution for the 6.5 Creed.
Forster and Redding are the most commonly used and are an excellent value. I like/use the micrometer seat dies.
-
20 hours ago, Twinkie said:
Even if I wasn't such a poor, I'd not ever do PRS because it sounds horribly toxic. It seems like the most blatant money-grab of any shooting sport and that's saying something.
BTW, I found it interesting how Doug Koenig and Ruger are at the center of this drama.
Not toxic at all. It is just a really expensive game to play. Nothing more, nothing less.
-
Thanks guys. I will order a bunch from SC.
-
My club is running a little low on brown tape. So I went to Target Barns site and it looks like they dont sell rolls of tape anymore, only pasters.
The last time I ventured away from Target Barn I ended up with really dark brown and not very sticky, tape.
Does anyone have any suggestions for a source of good quality tape?
-
It isnt very often that I shoot a handgun other than a revolver for the past several years. When I do switch it up I normally grab a PCC so I dont unlearn my revo stuff.
I am hoping to make the 2021 Regional ICORE Match. It just depends on if I am out fighting forest fires. The past couple years have been rough on my summer shooting schedule.
-
I have a few trimmers and the brushes are starting to go south.
One of them wore out brushes in short order. Maybe after 7-10K of trimming 223 brass.
Does anyone know of a source for new brushes?
-
If the ammo went in the gauge but not the chamber that means your gauge is not as tight as your chamber.
Most likely he didnt have the shoulder bumped back far enough.
The ammo that didnt work, check the headstamp. Lots of non-US headstamp brass will produce 300 Whisper/Blackout necks that are too think.
-
14 hours ago, AHI said:
That is a good useful answer
Unlike some of the others.
Well hopefully the OP will circle back.
-
Krieger. They will run you $350 before your gunsmith touches it.
-
I am using TG under 165 plated and 147 jacketed.
Accuracy with Clays in 9mm has always been garbage.
-
8 hours ago, Intel6 said:
Aaaand the the 6 Grendel is much just a 6 PPC that has been around for may many years before that
I have been shooting it since the early 90's 
Exactly. I tell people it is the 6 PPC of gas guns.
-
I do not have any type of compelling reason for you to help with the match much-less give any of your time for free.
Best option is to contact match staff and tell them exactly how valuable your time is to you. Politely explain to them that if they want you to help, you will require a discount. I am sure they will be more than happy to adjust your match fee once they realize how important you are.
-
If the NM governor wont let people from out of state come shoot, is there any chance of a refund for us out of town covid carriers?
We want to come, but NM wont let us.
-
I had this same problem with 223 brass and a Dillon Carbide Trim die.
I added more lube and it went away.
-
Add some lube.
Yes. I know they are carbide dies and lube isnt required.
But try it and I bet it helps.
It is one of those cant hurt, might help kind of deals.
-
On 9/8/2020 at 7:58 AM, belus said:
I thought the NRL22 shooters mostly used CZs. Tikka is thought to be a good competitor because the full size action gives more chassis options.
Admittedly an older article:
https://nrl22.org/sports/nrl22-2018-nationals-gear-survey-results/
But of the two OP wanted to choose between, I would pick the RPR because of the shorter barrel. I'd prefer the American stock, but wouldn't want the longer barrel if I'm trying to stuff it into ports.At our monthly rimfire PRS/NRL matches about 1/2-3/4 of the shooters are using Vudoos. The rest are a mixture of CZ and Ruger. I am using Vudoo and Remington 40X Elrod repeaters. Everyone once in a while I break out my Anschutz 1727 or CLE AR-15, just because I can.
The Ruger Precision and Ruger Americans have put out some decent barrels and some horrible barrels.
-
I would just grab a Vudoo and be done with it.
Case Rupture - What caused this?
in Rifle - Technical
Posted
Look inside that case and see if the priming compound is intact.
On mine, it was not meaning it lit off at some point.