Tom Freeman
-
Posts
1,461 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Tom Freeman
-
-
Strange.
My CS dealings with the new Zermatt, not Bighorn, led me away from Zermatt to Terminus.
The company wasnt the same after AJ sold it to Zermatt.
-
5 hours ago, Boomstick303 said:
Have you noticed any accuracy issue with shorter brass?
If not I assume you do not sort shorter brass from brass trimmed to exactly 1.745?
Zero accuracy difference that I can se inside 500-600 yards with my load using Hornady bullets.
I sort my bolt gun brass and my precision semi-auto brass. But for most of my 223 shooting, no sorting.
-
I trim all my 223 and 223 Ackley brass back to 1.745. By the time it needs trimming again I have lost it or the neck has split.
When processing 223 brass, if it is longer than 1.745 the Dillon trimmer trims it. If it is shorter than that, and almost all FC brass is, I just press on and dont sweat it.
-
57 minutes ago, Vic said:
Yeah, it's the Performance Center version, 5", with aluminum case etc. 1100 shipped.
Do it
-
If it fits in your chamber and you dont have to struggle to remove a loaded round, you are fine.
Your gauge isnt the exact same as your chamber.
Toss your gauge in the trash and go shoot.
-
Does the brass fit in your chamber?
It is very possible that your gauge and the chamber are not exactly identical.
-
Since the mid 90s I have gone from 1050s, to S-1050s to 1100s.
The S-1050 feels the smoothest and has the shortest stroke, but the 1100 is the best machine.
-
The same as all the centerfire PRS stuff, but with a Vudoo.
I am using a Vudoo 360, Eley ammo, S&B 5-25, RRS tripod, Traust bags and a Vector rangefinder.
-
On 2/27/2023 at 9:21 AM, SIGcurious said:
TK Custom makes a short extended cylinder release that is similar in profile. I think they are relatively new. Might want to take a look ...
Thats is awesome. I will give them a shout.
On 2/26/2023 at 5:03 PM, mikey357 said:Tom, I think Ed Brown discontinued those quite a while back, but they do come up For Sale every once in a while...I'll look and see if I might have one or two in my Parts Box and if I do, you're welcome to 'em...
Many thanks. Let me know.
-
Does anyone know when/if Ed Brown stopped making his cylinder latches?
I was wanting to buy a couple more so all of my competition revos feel the same, but I cant find them out there.
I tried the Hogue and preferred the Ed Brown.
-
Its baaaack....
Big Ben Tactical Rifle and Pueblo Tactical Rifle have again joined up to bring you the 2023 State Championship.
And... Thunderbeast Arms is still the main Match Sponsor.
2-3 Sept 2023 in Ramah (just east of Denver) Colorado.
9 stages. 5 close up (less than 75 yards) stages and 4 medium range (100-400 yards) stages. You will shoot 6 stages Saturday and 3 stages on Sunday. Set up will start Thursday at daybreak. Match shooting starts at 8:30 both Saturday and Sunday.
Paper and steel targets with hit factor scoring because that would have made Eddie Rhodes happy.
Recognized divisions will be Tactical, He-Man, Limited and Open.
Absolutely no steel core ammo or bi-metal jacketed ammo. Match DQ and $500 fine for anyone caught using it.
Registration opens up on 01 May. No refunds after 07 August.
Only 120 slots avail.
Contact me with questions. Sean is the Range Master, Justin and Matt are the Assist Match Directors and I am the Match Director. Charlene will be there to manage stats and maybe try to keep Sean, Justin, Matt and me from doing stupid things.
https://practiscore.com/colorado-state-tactical-rifle-2023/register
Once it fills up you will be waitlisted. When/if a slot comes open I will contact you directly to see if you still want to shoot.
-
For mixed brass with a bone stock Dillon measure 15-20 would be ok.
Done some measure tweaking about you will bring that down a little bit.
-
Put the swage rod back in and get it adjusted.
Something is causing the big gouges in the rim at some point. Find out what is causing that and when they are getting dinged. My guess is the little bent wire at the priming station needs to be snugged up closer to the case to ensure the case is in the proper position.
Try some WIN or FED brass to see you still have issues.
I would decap the bad cases and look inside the primer pocket just to see what it looks like in there.
-
You adjust the index with the set screw on the back of the press frame. You might also have a bent index shoulder bolt.
-
Get the 1100 and cry once.
-
Excellent score.
I have a soft spot for 5 inch Smiths. Might be the best balance of both worlds.
-
We just bought 1,000 paper IPSC targets from MGM. Shipping was prompt and the whole deal was perfect.
However, the cardboard MGM uses is pretty thin compared to what we are used to. With the wind we get here, I am hoping they will work out ok for us in the end.
Has anyone else noticed a trend towards thinner cardboard? I assume it is to keep material and shipping costs down.
-
FTR means 308 or 223, but 223s get beat up pretty bad at 1,000.
308 barrel life shooting 185s or 200s is 4,000-5,000 rounds.
Finding an off the shelf manufacturer of a single shot 308 is going to be a tall order.
Just get a custom action and stock and have your gunsmith take all the measurements he needs for additional barrels. That way when you need a new barrel, he wont need the gun. All you need is a barrel vice and action wrench.
-
Army of Darkness and The Return of the Living Dead are tied for first place.
But they are both spoofs, almost.
-
Best affordable bullet I have found is the Hornady 55 FMJBT. Pretty damn cheap when you buy a case (6,000) of them.
-
19 hours ago, Cuz said:
Has anyone tried the new FW shell plate? They stopped making them for a while, so I assume this is a “new and improved” version?
I don’t know why, but I feel like I “need” one of these. I wonder if they will offer a Black Friday sale???
I bought the 9mm and 223 plates.
They are ok, but nothing that made me say "Wow! That was money well spent."
-
Last I knew the origins were a mechanical ejector and not a spring loaded ejector.
Best advice I can give is to work the bolt a little more aggressively.
I got tired of the run around with Zermatt customer service, so I sold my actions and went with a Terminus. Zero regrets.
Its too bad, Bighorn/Zermatt used to be an awesome company.
-
Not crimping can help with accuracy unless your brass is the exact same length.
I got the best accuracy with N-110 and Berger 215 and 230 Hybrids.
-
You might want to check into Berger match ammo.
Dillion RL1100 indexing issue with a Mark 7 Autodrive
in Dillon Precision Reloading Equipment
Posted
You might have a bent shoulder bolt in the back of the machine.
It is the one that has the roller on it for the indexing pawl. It tales a 3/16 allen wrench.