Jump to content
Brian Enos's Forums... Maku mozo!

Will_M

Classifieds
  • Posts

    645
  • Joined

  • Last visited

Posts posted by Will_M

  1. I figured it would be better to provide some data. This is a chart I generated on JBM Ballistics. 124gr Winchester bullet. 1080ft/s muzzle velocity. That gave me half an inch of drift at 20 yards in a 30mph wind. I'd say you'd need to be shooting in a hurricane for it to matter at 20 yards.

     

    The column marked "Windage" is displayed in inches of drift.

    windage.jpg

  2. Weight and length will be the most important. Find the lightest suppressor in your budget from a major manufacturer and you'll be set. Pretty much every 7.62 can is metering within a few decibels of each other, but weight is what makes it actually usable.

     

    I've got a Specwar 762 that is still the quietest 30 caliber can, but at 24oz and 9" long it's unpleasant to shoot. Shooting a rifle offhand with it attached is like doing dumbbell raises.

  3. I never could get low-recoil buckshot to run in my M3000. Full house buckshot ran without a hitch and put down plates with a little more authority. I was more confident with the harder hitting shot knocking down plates with a glancing blow, vs having to aim hard with low recoil stuff.

     

    Plates going down and the gun cycling 100% of the time was more beneficial (for me). If I had one low recoil shotshell hang up during a stage, I spent more time clearing it than I saved shooting a whole match of low recoil ammo. 

     

    Plus the standard stuff is usually cheaper.

  4. With low mass parts and the gas block running wide open, I'm guessing your gas block isn't aligned. I've got an almost identical setup and my gas block is only open about 50% and that's a few "clicks" past the point where it locks back on an empty mag so it'll still cycle when it gets dirty.

  5. On 10/8/2018 at 12:54 PM, AustinT said:

    Drop is predictable....wind isn’t. Get whatever shoots best and bucks the wind well. My favorite is the 75 hornady....it might stabilize in 1:9 but the 68s and 69s will work well at distance also.

     

    The 75gr Hornady's are extremely "iffy" in a 1:9. In my experience the Hornady bullets tend to be longer than other manufacturers based on the profile. This is especially true in their AMax line. 

     

    I liked the 68/69gr bullets for the velocity bump over 75/77gr. Significantly flatter trajectory and buck the wind pretty well up to 500 yards.

  6. On 9/29/2018 at 9:36 PM, Matt1 said:


    Sure, form is important but you need to be able to apply progressive stress to get stronger and if you can’t do that because of a limiting factor then you won’t get stronger.

    You should absolutely address whatever mobility issues are contributing to pain but simply backing off the weight isn’t necessarily the right answer.
     

     

     

    I agree with this. But if there is an issue that is requiring you to use a support like straps or a brace to perform a lift, you would be much better off addressing that issue first. 

     

    It's like using a Smith machine for your squats. Sure you can lift more, but the first time you try to lift that same weight on a power rack, you're in for a bad time.

  7.  

    On 9/29/2018 at 9:30 PM, rritchie82 said:

    Amino energy or Branch Chain Aminos are good energy sources. Plus they will help preserve your protein so your muscles don’t fatigue as quickly.

     

    BCAA's will help with recovery, but not so much with providing energy over the course of a long day. You'd be better off with some complex carbohydrates. 

     

    A small serving of eggs and some toast would be a quick and easy option.

  8. On 9/24/2018 at 4:05 PM, greerstyl said:

     

     


    Just used it first time live 3 gun over the weekend and LOVE it. The red dot is perfect and I like the cross hairs. I didn’t have any real distance targets but so far so good


    Sent from my iPhone using Tapatalk

     

     

    How is the brightness on the red dot in broad daylight?

  9. I've got one and love it. I can pop the slide stop out and swap the uppers in a few seconds. One for 3-gun/suppressor host, and the other for USPSA limited.

     

    Lots of rounds through each top end and both are still very tight. 

     

     

    thumbnail.thumb.jpg.da0c7f5186fd8dedcf75bb26e22d5edf.jpg

  10. Personally, I can't stand it when people take forever between "make ready" and assuming the start position. After the make ready command is not the time to be practicing your draw and reloads 10 times and closing your eyes and pantomiming the stage including leans and stuff.

    If every person takes just 1 minute to get ready, it can add well over an hour to my local match just in watching people stand there and waste time.

×
×
  • Create New...