Quack
-
Posts
954 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Quack
-
-
Good stuff Robert!!!
-
STI switched from BoMar to LPA fairly recently (1-2 years). Your Trojan should have the LPA.
-
-
-
I really don't remember. I do know I had the trigger down under 2#, after I did work.
-
I think I bought one years ago. I'm pretty sure it's just the EGW part.
-
Where do I buy one of these? Does it set off WSP or just Federal?
Thanks.
It's an Accu Shadow with CGW 8.5# mainspring. Gotta use Federal primers
-
-
And it's up for sale in the classifieds.
-
I had issues when I first shot my Accu, but gave it some time and love it. I don't care for my glocks that much anymore.
-
So ~$1150 usdIn Czech CZ 75 SP-01 Shadow list price is 22990 CZK and Shadow 2 is 27900 CZK. Increase is 21%.
-
They show it fitting in the box, it should make weight too.Hello: Has anyone seen the classic version yet? Looks like it would be great for single stack if it makes the weight. Thanks, Eric
-
Knedrgr went the other way and fit a 1911 slide to a 2011 frame.
-
it'll work, you'll just have to fit the frame and slide.I have the 2011, but don't want to waste money buying the 1911 frame if it will not work. I was thinking it would be pretty cool to be able to slide off the slide.....ha, ha, and just slip it onto a 1911 frame. That way I have two great guns for the price of an additional bottom frame, not too bad a deal.
-
I'm not at home, but IIRC the STI feed lips (9mm) are .350" - .355" at the rear and tapered .003" - .005" wider to the front (per Dawson tuning)
-
Are you shooting Single stack?
Things to consider:
Weight limit - 43oz
Bull barrel (not legal)
Dust cover no longer than 3.25" from the slide stop pin
So neither of the 2 guns would SS legal.
-
So ~$1150 usdIn Czech CZ 75 SP-01 Shadow list price is 22990 CZK and Shadow 2 is 27900 CZK. Increase is 21%.
-
For the Cleveland - Columbus Ohio folks. I saw 4lbs of N320 at FFF in Ashland today. $38.99/lb
-
Check the extractor.
-
These are the 11152 mags, which are the factory 18rd mags
-
http://czcustom.com/cz75magwellidpa.aspx
CZ 75 / 85 / SP01 Aluminum Magazine Well
Will Fit in the I.P.S.C. box. Depending on Sight Options
Will Fit in the I.D.P.A box. Depending on Sight Options
New super size Aluminum mag well for the CZ 75 series guns.
As large as this mag well is it still fits in the I.P.S.C. box.
As you can see in the video you will need to purchase 19 round magazines (11152) and either trim the base pads or we suggest using the:-
CZ Rubber Base Pads 10070
The Short Extended Base Pads 10187
You Will all also need short grips (CZC Part #10148), or to shorten your grips for this magazine well to work.
At this time there are no longer magazine for the CZ 75 40 S&W guns.
Which means major modifications need to be done to base pads for the 12 rnd magazine to work in the mag well. (or you can use SP01 9mm 19rnd magazines we have tested them and they work fine )
We suggest using the CZ 75 Main Spring Plug for Mag Well (10165)
Main spring plug with pin that goes into the hole on newer CZ Custom CZ 75 Mag wells.
The mag well can be friction fitted, but using this part makes the mag well much more secure on the gun and does not require tightening of the mag well to the frame for a good fit.
-
Ahhh...read it again and saw magwell. If that's the case, I think you need to stick with factory 18rd mags and CZC or TTI pads.
I don't know, as I shoot Production.
This is how close the mag is with the MG17
And SP pads
-
This^^^you using the gun for production or limited minor?
if production, get these: http://gregcotellc.com/cart/cz-mecgar-magazines-c-130/cz-75b-cz-85b-cz-75-sp01-17-rd-9mm-afc-mgcz7517afc-p-591.html?zenid=0288a694e2b67ac165133b2a3f93437b
these are great, and will work for production. if you get the 19 rounders, your gun with them in it will most likely not fit the USPSA Production box and you will be moved to Open.
if you're shooting limited, then sure go with the 19 rounders.
Factory 16rd - MG17 AFC - MG19AFC - CZC W/ ShockBottle - MG17AFC W/SP
-
The bushing isn't legal, but an argument could be made that the bushing is more like these parts:
"Sights, firing pins, firing pin retainers, pins, extractors and ejectors MAY be replaced with OFM or aftermarket parts."
Rather than these parts, which are all manipulated by thumbs/fingers.
"Examples of external components which may only be replaced with OFM parts include (but are not limited to): magazine releases, slide stops, thumb safeties and triggers. "
Maybe something to ask for clarification for the next rule book?
Fitting an STI 2011 Frame to an STI Slide
in General Gunsmithing
Posted