GJGary Posted February 24, 2017 Share Posted February 24, 2017 Any success using rifle length buffer tube, spring, buffer weight ect in 9mm ar instead of a carbine length tube. Have a rifle length I would like to use if possible. Link to comment
Pirate Posted February 24, 2017 Share Posted February 24, 2017 I think jp makes a spacer for pcc that works in a rifle length tube using a carbine buffer/Spring. Link to comment
Aircooled6racer Posted February 24, 2017 Share Posted February 24, 2017 Hello: I think it would work just fine. Remember you need the buffer in the 9mm range of weight. I would use a 223 spring and a buffer weight of 5.6ozs or so to start if you are using reloads in the 130-140PF. Heavier weight if using factory ammo. That should be close with a 16" barrel. Thanks, Eric Link to comment
Les Snyder Posted February 24, 2017 Share Posted February 24, 2017 CJ... I use a rifle length buffer and tube... if you want to play around with DIY weights in a rifle buffer filled with 7 1/2 shot... 6.0 1/2 brass plug....6.2 5/8 brass plug... 7.0 filled with poured lead...9.0 after trying the heavier buffers I switched back to the stock 5.2oz rifle buffer and tube Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now