flatsman

Haven't tried it no need to hs-6 and autocomp is all I've been running for 9major and mostly the hs-6 a little cleaner but get almost exact same results I'm just 1 grain less with autocomp

A thousand thanks to all on here just left a range session I used two different powders autocomp & hs-6 still playing a little but made major with hs-6 HS-6 124 grain coated round nose 10 rounds averaged 1370.25 fps 7.2 grain 169.9 PF Autocomp same bullet 5.4 grain 10 shots average 1210.7 with 150.1 PF oal was 1.135 on all rounds put 50 rounds through and no hick ups at all again thanks guys

Thanks guys I do have a crono I'm doing some rounds at bottom of load and working up using autocomp and hs-6 124 coated just didn't want to push it to much on crimp pulled a couple rounds apart and had indent of case real noticeable thought it seemed to tight

I'm loading for 9 major any help would be great thanks

I'm new to loading how tight is to tight for crimping and what could happen with rounds crimped to tight

Any one see any problems using cci 550 small pistol primers for 9 major I know they are mag primers I'm using hs-6 and autocomp powder thanks

Typo the acme 's are rated for major I've been shooting open for a couple months now should have my class this month still new to it but it grabbed me like a hungry gator and I'm all in just doing uspsa now but who knows in the future thanks again

I'm shooting M&P 5 inch with kkm barrel and carver comp shooting open class the acme coated are rated for minor several friends of mine are using them with great results that's how I came across them and thanks for info was not sure if tg would work or not but that's fine just use it for my 40 any more info would be great everyone on here has been great so

Ok so new to all of this reloading haven't even gotten totally set up yet waiting on my Dillon to get here. Any help would be great got some advice from another place on this site trying to make 9 major using acme red coated 124 i got some cci small pistol primers and I'm trying some hs-6 some tight group and some autocomp any advice where to start thanks to all

Oops thumb got heavy

Want to load major went with the 145 because they said it was somewhat new from them and were having great results and some guys I shoot with have switched to them from other coated bullets any info is greatly appreciated as I'm a dummy in this field right now that will change though

Want to load major went with the 145 because they said it was somewhat new from them and were having great results and some guys I shoot with have switched to them from other coated bullets any info is greatly appreciated as I'm a dummy in this field right now that will change though

Want to load major went with the 145 because they said it was somewhat new from them and were having great results and some guys I shoot with have switched to them from other coated bullets any info is greatly appreciated as I'm a dummy in this field right now that will change though

So I'm new to reloading due to my new found obsession to uspsa. I've built a M&P open gun 9mm 5 inch with a Kkm barrel and carver comp I'm using acme 145 grain red coated bullets I'm looking for some powder and primer recommendations and maybe some powder weights as well thanks to all

New to reloading and trying to get some info on making major PF I'm using acme red 145 grain round nose looking for powder and primer recommendations thanks