lcs Posted January 7, 2010 Share Posted January 7, 2010 Been shooting 121 IFP and Silhouette for open. Appreciate any loads for 115 and N350. I am using standard length barrel no poople holes. If you add a load just please specify barrel length. Thanks Link to comment Share on other sites More sharing options...
XRe Posted January 7, 2010 Share Posted January 7, 2010 (edited) Edit to remove some really bad data that would really cause a problem Edited January 7, 2010 by XRe Link to comment Share on other sites More sharing options...
lcs Posted January 7, 2010 Author Share Posted January 7, 2010 Use a lot. Actually, I'm guessing around 10.5 or so will be a good starting point for you. 10.0 makes 175PF in my old gun (5" barrel, 4 small holes). 10.2-10.3 should be in the same neighborhood w/ a 121. Up another couple tenths for 115, at least to get you in the neighborhood.... I think you read 115gn bullets as N105. Would 10.2/10.3 of N350 even fit in a 38SC case Link to comment Share on other sites More sharing options...
XRe Posted January 7, 2010 Share Posted January 7, 2010 I think you read 115gn bullets as N105. Would 10.2/10.3 of N350 even fit in a 38SC case Oh.... you're right.... D'oh... Yeah, 10.2 of N350 would fit, I'm pretty certain It would not be a pleasant thing, though, I imagine The only data I have w/ 115gr and N350 in my old gun (with lots o' holes) was 8.3gr at 161PF. I believe 8.7-8.8 or so would've been about right. Link to comment Share on other sites More sharing options...
lcs Posted January 7, 2010 Author Share Posted January 7, 2010 I think you read 115gn bullets as N105. Would 10.2/10.3 of N350 even fit in a 38SC case Oh.... you're right.... D'oh... Yeah, 10.2 of N350 would fit, I'm pretty certain It would not be a pleasant thing, though, I imagine The only data I have w/ 115gr and N350 in my old gun (with lots o' holes) was 8.3gr at 161PF. I believe 8.7-8.8 or so would've been about right. Cool--that is what I looking for. I needed a starting point. 8.5 should be a starting point for a 5". Link to comment Share on other sites More sharing options...
G-ManBart Posted January 8, 2010 Share Posted January 8, 2010 I tested 8.2gr of N350 with MG 115gr CMJ's at 1.235" twice in my Bedell (shorty, no popples). I got 168PF on the first day and 166 on the second day (20fps or so difference, which isn't crazy with different weather and lighting). R, Link to comment Share on other sites More sharing options...
nYdGeo Posted March 23, 2010 Share Posted March 23, 2010 Been shooting 121 IFP and Silhouette for open. Appreciate any loads for 115 and N350. I am using standard length barrel no poople holes. If you add a load just please specify barrel length. Thanks I am shooting 8.0gr of N350 behind a 124 at this time, but was shooting 8.8gr or 8.9gr behind a 115. I do have holes in the barrel. Before the barrel porting, it was 7.8gr of N350 behind the 124, and 8.6gr behind the 115. Very similar to 7625, but the N350 had a hair more recoil and shot a hair flatter. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now