Overscore Posted January 29, 2019 Share Posted January 29, 2019 (edited) On my 650, the primer indexing arm no longer fully ratchets back to rest in the next hole in the rotary primer disk. It drags on the disk and stops just short of dropping into the next hole without a nudge. What I've done: Ensured properly lubrication per Dillon's instructions. Replaced indexing arm (13662), index arm spring (13965), disk detent spring (13844), and disk detent ball (13932). Tried both sides of the rotary primer disk (13499). (I don't have a spare one of these.) Any ideas on what else to check? Edited January 29, 2019 by Overscore Link to comment Share on other sites More sharing options...
Overscore Posted January 29, 2019 Author Share Posted January 29, 2019 Isn't this always the case? Immediately after posting this, I looked more closely at the parts diagram and saw that I had the index arm bowed washer (13832) upside down. I made my primer system great again. Perhaps someone will come across this in the future and learn from my error. Link to comment Share on other sites More sharing options...
teros135 Posted January 29, 2019 Share Posted January 29, 2019 We've all been there, one time or another... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now