Ce Pocket Pro Timer Question

[nhglyn]

I have lost the manual to my Pocket Pro timer. Is there a link on the internet to download another? The CE website just freezes Netscape when I try to access it.

More importantly, can someone tell me how to set the par time on it? Want to be able to set for start beep and say 1.5 second beep, as an example. If you could post instructions for that or email asap I would greatly appreciate it.

Thanks.

[Clay1]

Pulled up their web site for you:

Competition Electronics

If you have any questions about your product call us between 8:00-4:00 Monday thru Friday central time at 815-874-8001 FAX 815-874-8181.

Sorry, I use a Pact, but the phone number might do you some good.

Rick

[Greg Jones]

Here is the link to the manual on the CE Web site:

http://www.competitionelectronics.com/medi...Pocketpro01.pdf

The par time section is as follows:

SECOND BEEP PUSH BUTTONS.

In the Par Time (2nd Beep) mode

a second “stop” beep will occur at the

time set. This is useful in dry fire prac-

tice.

The first thing you will want to do is

set the Par Time desired. To do this,

press the “2nd Beep” push button and

the display will show “PAr” for 1.5 sec-

onds then a preset time of 0 seconds.

To change this, simply press push

button for the digit you desire to

change (.1 sec,1 sec,10 sec) while

holding down the “2nd Beep” push

button. The digit will advance to 9

and then go back to 0 and advance

forward again. Releasing the “2nd

Beep” push button will save the time

selected. It will be saved in power

down memory. The par time must be

set to “0” to delete it.

To run the Par Time sequence,

simply push the “START” button and

the buzzer will sound at a random

time from 1 to 3.5 seconds or instantly

depending on your Instant/Random

switch selection. The display will show

zeros at this time. The Par Time will

begin at the start of the tone and a

“2nd Beep”/stop tone will occur at the

time previously set. The review capa-

bility is useful in determining how

many shots occurred after the stop

beep. Note that the BEGINNING of

the stop beep occurs at the time set

and has a duration of .3 seconds. If

you have forgotten the time you set

for the par time, simply hold down the

“2nd Beep” push button for 1.5 sec-

onds. The par time will appear in the

display. Releasing the “2nd Beep”

push button and pushing the other

push buttons will still allow reviewing

of the shot string.