SlvrDragon50 Posted April 20, 2018 Share Posted April 20, 2018 Since these are both small rifle + pistol, it looks like the equipment changeover is fairly simple with just changing out the plate. Am I missing anything else? I know I will have to make adjustments with the case feeder itself as well as the drop tube + shuttle. I don't expect to load a ton of .223 so I'm trying to evaluate if it's worth getting the plate to feed .223 cases versus just handloading them into the shell plate. I usually load in mass so I'm not going to be changing constantly between .223 and 9mm. Link to comment Share on other sites More sharing options...
Bullett Posted May 3, 2018 Share Posted May 3, 2018 You'll need a few things. Like you said you'll need the plate for the feeder itself. You'll need to add the pivot adapter and bushing. By adding this adapter you'll also need to adjust the feed tube end so it has enough clearance for the assembly to pivot. The vblock you're using for 9mm should be ok to use for .223 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now