sti38super Posted May 3, 2017 Share Posted May 3, 2017 I have a near new CK 2011 open pistol with a EGW hammer and Titanium strut. Some time the hammer gets stuck when shooting and the trigger will not drop the hammer because the hammer is over traveled down onto the beaver tail. If you just touch the hammer it will pop back into battery and the trigger will drop the hammer. I can find no reason for the hammer to stick, the strut is not touching any where in the grip safety. I have tried the same type hammer from another CK and it is even worse about stick . Any Ideas? Link to comment Share on other sites More sharing options...
GringoBandito Posted May 3, 2017 Share Posted May 3, 2017 (edited) A burr in the MSH preventing the parts from moving freely? Have you tried using a 17 or 19LB hammer spring? Hammer strut too long? Edited May 3, 2017 by GringoBandito spelling Link to comment Share on other sites More sharing options...
sti38super Posted May 3, 2017 Author Share Posted May 3, 2017 No burrs in the MSH tried a 19 lb. did not help. Tried a different hammer and strut, it was even worse. I have built 2011 and 1911 for 25 years and have never had this happen before. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now