B_RAD Posted February 3, 2017 Author Share Posted February 3, 2017 (edited) 1 hour ago, johnbu said: This is why i removed the factory OT screw completely. The gain is non-existent and bad things can happen easily if it's too close to the edge. My LP didn't t come with one. I would have removed it if it did. Edited February 3, 2017 by B_RAD Link to comment Share on other sites More sharing options...
IronArcher Posted February 4, 2017 Share Posted February 4, 2017 I like that the Xtreme seems to start farther out, and (especially with the over travel screw set right) ends farther out.The stock one just made the gun feel too small... and that sharp edge at the top was annoying.(Note: XXL hands)Sent from my iPhone using Tapatalk Pro Link to comment Share on other sites More sharing options...
B_RAD Posted February 7, 2017 Author Share Posted February 7, 2017 (edited) Got the straight Xtreme trigger. It lowered the DA pull weight by about half a pound. I took it out and put it in twice. Each time I got the same pulls weights. When i put the stock trigger back in the trigger pull was where it was before adding the new trigger. Guessing since it's straighter, I can get my finger a little lower and that provides a little more leverage, which makes for an easier(less weight) pull. Edited February 7, 2017 by B_RAD Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now