victor6 Posted July 13, 2016 Share Posted July 13, 2016 Howdy. I have a G17 MOS on the way and I'm looking to do a CO build. Any suggestions as to what components to use or how to set it up would be appreciated! This is my first Gen 4 Glock ... so I'd be interested if there are any gotchas with the Gen 4s that are unique to that platform versus the Gen 3s. The only known piece of the build is that I'm using a Burris Fastfire III as I have one laying around. Thanks, Victor Link to comment Share on other sites More sharing options...
aandabooks Posted July 13, 2016 Share Posted July 13, 2016 What is there to build? Throw on the optic, maybe buy some basepads that don't add capacity, put some grip tape on and go shoot. Link to comment Share on other sites More sharing options...
mikeAZ Posted July 13, 2016 Share Posted July 13, 2016 Let's face it, ALL red dot's take quite a beating when they are slide mounted..... Nice part is Burris's lifetime warranty, even if your not the original owner. The FF111 is fine, I like the 7MOA dot. Careful with the screws.... as I remember some were too long and the MOS plate can be bent........ Link to comment Share on other sites More sharing options...
victor6 Posted July 14, 2016 Author Share Posted July 14, 2016 (edited) What I thought was interesting about the CO rules is that the gun just has to weigh under 45 ounces. I would imagine folks are adding weight to their Glocks they run in CO. Beyond weighted 140mm mag extensions and a ground down Seattle slug, how can I add weight to this G17 MOS? Just trying to be creative. Edited July 14, 2016 by victor6 Link to comment Share on other sites More sharing options...
splashdown Posted July 14, 2016 Share Posted July 14, 2016 (edited) I don't add weight to my CO gun. I like the feel of a lighter gun. I'm running a G23 with RMR. I had already stippled it and then undercut the trigger guard once that was allowed. Otherwise, no real mods to the gun. Edited July 14, 2016 by splashdown Link to comment Share on other sites More sharing options...
SCTaylor Posted July 14, 2016 Share Posted July 14, 2016 Tungsten / stainless guide rod. And I think that is about it to keep within the rules. I will be running CO using a G19 with a SS guide rod, G17 mags w/ TTI base pads, and that is it. This will be or will duplicate my concealed carry rig, main reason for keeping it tame. Link to comment Share on other sites More sharing options...
victor6 Posted July 15, 2016 Author Share Posted July 15, 2016 Tungsten / stainless guide rod. And I think that is about it to keep within the rules. I will be running CO using a G19 with a SS guide rod, G17 mags w/ TTI base pads, and that is it. This will be or will duplicate my concealed carry rig, main reason for keeping it tame. That's cool. I've been carrying a J-frame Smith for the past 28 years (in my right front pocket ... yes, i'm lazy). The current situation has me thinking that I should carry a little more firepower. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now