Garmil Posted May 28, 2016 Share Posted May 28, 2016 Just got a shotgun with an xrail. The problem I'm having is I'm not getting spring pressure on the main tube when I'm on the auxiliary tubes. I fill up the main tube and spin to tube 2 and have no pressure on the shekels in the tube I can push the shell up an inch or so before feeling any resistance against it. When I add the first she'll it feels normal again then load 2-3-4 all fine. When spinning to tubes 3 and 4 the same thing happens. unloading it does the same loses spring pressure and shells just fall down the tube or ghost load double feed its a struggle to get them all out and it doesn't always rotate when a tube is empty on its own. Once it's spun to the main tube it works perfectly I have taken it apart and reinstalled the tube housing clocking it per the instructions and am using win as shells that are recommended Any help would be appreciated Link to comment Share on other sites More sharing options...
Megamind Posted July 27, 2016 Share Posted July 27, 2016 Call the guys at Xrail they have been very helpfull for me . What model x rail is it ? What shot gun? Link to comment Share on other sites More sharing options...
Stlhead Posted July 27, 2016 Share Posted July 27, 2016 It sounds like the threaded nipple between the x-rail and the mag tube coupler is not adjusted properly. Link to comment Share on other sites More sharing options...
Garmil Posted July 27, 2016 Author Share Posted July 27, 2016 It sounds like the threaded nipple between the x-rail and the mag tube coupler is not adjusted properly. Fixed it a while ago but yeah that was it. How I tightened it to the barrel was making the difference. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now