chrishoesel Posted May 25, 2016 Share Posted May 25, 2016 (edited) As the title states, does the Redding National Match die with mic and sleeve work for loading 308 on a S1050 or will I have clearance issues with the sliding sleeve? Thinking I should have ordered the Dillon die set when I got the caliber conversion kit. I know it works fine on .223, but not sure if 308 will clear it as it advances. I've had the Redding dies for a while and have not loaded 308 yet but fixing to. Would like to know so I can order the Dillon dies if necessary. (I'm overseas so I can't check until Saturday) Thanks! Edited May 25, 2016 by chrishoesel Link to comment Share on other sites More sharing options...
roxfo Posted May 26, 2016 Share Posted May 26, 2016 I had to cut the sleeve flush with the die body, otherwise the bullet interferes as the shellplate starts to advance. I am very happy with the Redding comp seater on my S1050 though; I wouldn't use anything else. The photo shows a Sierra 2156 just clearing the die; the mic is wound almost all the way down, so you don't get a huge range of adjustment. Of course, you could back the die out but then the case wouldn't properly engage on the shoulder of the sliding sleeve. Link to comment Share on other sites More sharing options...
DEP44 Posted May 27, 2016 Share Posted May 27, 2016 I cut the sleeve of mine partially to keep it functioning as intended. I was a bit afraid it would spin around and block the projectiles, but that hasn't happened so far. Link to comment Share on other sites More sharing options...
chrishoesel Posted May 27, 2016 Author Share Posted May 27, 2016 I'm going to try notching the sleeve. I don't want to give up my seating die. Thanks for all the ideas. Link to comment Share on other sites More sharing options...
roxfo Posted June 8, 2016 Share Posted June 8, 2016 I cut the sleeve of mine partially to keep it functioning as intended. I'm curious why you would leave an uneven portion of the sleeve like that. Is that what you mean by 'functioning as intended' ? If so, how does it function more 'as intended' than cutting it all the way round? .. Link to comment Share on other sites More sharing options...
DEP44 Posted June 9, 2016 Share Posted June 9, 2016 So it still hits the shellplate and slides up in the die Link to comment Share on other sites More sharing options...
roxfo Posted June 9, 2016 Share Posted June 9, 2016 So it still hits the shellplate and slides up in the die I always thought that the sleeve should be operated by the case (specifically, the case shoulder against the shoulder in the sleeve), ensuring positive location, concentricity etc. If the sleeve is driven by the shellplate then the case isn't necessarily even in contact with the sleeve and guided by it, so you might as well use a standard/sleeveless die. In other words, if the sleeve contacts the shell-holder/shellplate when a case is present, the die isn't adjusted properly. Consequently: fully cutting down the sleeve retains the intended function. .. Link to comment Share on other sites More sharing options...
DEP44 Posted June 10, 2016 Share Posted June 10, 2016 http://www.redding-reloading.com/tech-line-a-tips-faqs/139-com-seat-bullet-depth Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now