Dillon 650 getting stuck on upstroke

[Lfree6]

While loading with small primers last night the machine started stoping on the upstroke, I was down to the last few shells on the plate and the primer station was empty and it got stuck on the upstroke. There was a primer on the primer punch so I. Reached in and removed it then the machine would cycle. Next cycle same thing, remove the primer from the punch then it would cycle.

Any ideas?

Larry

[Sarge]

Crimped pocket if it's sticking just as the stroke should be priming.

[Slostang]

Try slowly clicking the primer wheel. If it clicks then starts turning you've got a primer timing issue.

[Lfree6]

Feel kinda silly, I tightened up the punch and it's fixed. I guess the person who put it together at Dillon got a little sloppy as its only 2 day old.

Thanks all

Larry