Singletracker Posted April 13, 2015 Share Posted April 13, 2015 Just got my Versamax shotgun and have been learing the manual of arms and getting comfortable It came with a +2 extention and I know this is silly but the manual says nothing about installing. I'm assuming you just pull the end cap and pry off the "retainer" and install the extention w/o anything else? As in the spring will rest inside the extention tube? Is there a trick to getting the retainer out? I tried to lightly pry it out but it's pretty soft and I don't want to gall it if I need it in the future. Link to comment Share on other sites More sharing options...
mitommy Posted April 14, 2015 Share Posted April 14, 2015 The end cap on my VM Tactical is screwed on. I think the VM Comp is the same. If it is tight try ussing a strap wrench to hold the tube. Link to comment Share on other sites More sharing options...
Iowashooter Posted April 14, 2015 Share Posted April 14, 2015 Yes extension just screws on the one piece 8 round tube but first you do have to remove the retainer. I do it by prying on alternating sides until I van get a pair of pliers on it to squeeze it and remove it the eest of the way. Be careful and wear your safety glasses there is alot of spring pressure under there. Link to comment Share on other sites More sharing options...
Singletracker Posted April 14, 2015 Author Share Posted April 14, 2015 The end cap on my VM Tactical is screwed on. I think the VM Comp is the same. If it is tight try ussing a strap wrench to hold the tube. Yea the comp is screw on as well, but there is a pot metal retainer under it. Thanks Iowa shooter, I figured that was the case Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now