jogan Posted February 13, 2015 Share Posted February 13, 2015 Just wanted to make sure I did this correctly.... Removed the old mainspring, put on the new mainspring plug with the little pin sticking out the bottom, did NOT put the mainspring pin back in, slid on the magwell from the rear, depressed the mainspring plug up into the gun in order to finish sliding the magwell on. Then, the mainspring plug "clicked" down into the hole in the magwell. Is that it? There was no way I could find to slide the magwell past the mainspring plug with the mainspring pin installed. Just wouldn't go up far enough! Everything seems to work correctly without the mainspring pin in there. No way for the plug to come out with that magwell on there! Thanks for any help, guys. Now...on to type "mainspring" just one more time... Link to comment Share on other sites More sharing options...
BeerBaron Posted February 13, 2015 Share Posted February 13, 2015 yeah the mainspring is now captured by the magwell where that pin goes in instead of by the pin. so the spring and the new cap is what's holding the magwell on and the magwell in turn is keeping the mainspring in there. Link to comment Share on other sites More sharing options...
jogan Posted February 13, 2015 Author Share Posted February 13, 2015 awesome! Thanks for the answer! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now