CZ sp-01 trigger job question

[MP9]

Hi guys.

I have a sp-01 standard with safety.. the stock trigger is awful, so I will be doing some trigger job.. polish, replace springs.... there shouldnt be any problem with that nor with the CZ custom competition hammer drop in..

but the standard sp-01 has a long reset.. is it legal to modify or change the disconnector in order to get a reduced reset distance?

the DA will or should be remain the same.. but the SA reset can be shorter and may change the SA rest position. ( I dont wanna do any change if it is not legal)

for SSP there should not be any problem because you start hammer down...no external visible modification..(let me know if I'm wrong)

but for ESP. is it legal? I start C&Locked. it should be close to the sp-01 shadow..there won't be any screw do adjust it, neither internal or external.

thanks

[emjei]

Cagun Gun Works sells the disconnector you need.....plus other goodies

[CZinSC]

Lots of good info on the CZ Forums also: http://www.czfirearms.us/index.php

[alma]

It's legal.