bigkyle72 Posted May 14, 2014 Share Posted May 14, 2014 So I was going to put a flip up 10/22 sight on my shotgun for slugs because I don't want to whack the hell out of my barrel and I don't have an M2 so I can't send it off to have Kurt's tool used. So the 10/22 sight seems to be best option. I was wondering if someone could please mic the actual dove tail to see how deep I have to put it. I want to make sure I have enough meat on my vent rib to do this. Thanks! Link to comment Share on other sites More sharing options...
kurtm Posted May 14, 2014 Share Posted May 14, 2014 So you don't have an M2....so what do you have? In 1996 My brother and I installed a 10-22 flip up sight on my M1 Field, which I am still using. We got the idea from John Shaw from shooting with him at the old S.O.F. match, so I can't say I was the innovator of this... John Shaw was!!!! (notice how I give credit to the originator... not just re-hash what I have learned from someone else and make it seem like my idea!) As I recall (don't have a caliper with me at work) the depth of the dove tail is .100 and it is around 1.950" from the back of the barrel where the rib starts to the center of the dove tail Link to comment Share on other sites More sharing options...
GunCat Posted May 14, 2014 Share Posted May 14, 2014 Kurt is right, the 10/22 dove tail is .100” deep (3/8”wide x 60 degrees). Kyle (you probably already know this) if the rib is flat all the way back to the receiver (like the new A5) keep in mind that if you add a taller rear sight on top of the rib you'll likely have to add a taller front also to maintain a similar sight alignment. Link to comment Share on other sites More sharing options...
bigkyle72 Posted May 14, 2014 Author Share Posted May 14, 2014 Thanks Kurt and Steve, yes its the new A5. I figured I would have to change my front sights to a taller one because there is no dip in the vent rib. Link to comment Share on other sites More sharing options...
alma Posted May 14, 2014 Share Posted May 14, 2014 While on that subject which larger FO sight would you recommend for the A5? Link to comment Share on other sites More sharing options...
Zeke013 Posted May 14, 2014 Share Posted May 14, 2014 What is "Kurt's tool"? (I have an M2 and would love a rear sight.) Link to comment Share on other sites More sharing options...
bigkyle72 Posted May 15, 2014 Author Share Posted May 15, 2014 While on that subject which larger FO sight would you recommend for the A5? I think the one that it comes with when you buy the set of 10/22 sights Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now