jstagn Posted March 21, 2014 Share Posted March 21, 2014 Just did a quick comparasion with chrono. Seems E-3 needs about .1 gr less than Clays for the same speed. Will do further testing. Interested to hear from others who have chrono this load. 45acp 230gr xtremme bullets, same overall length and crimp. Link to comment Share on other sites More sharing options...
parisite Posted March 22, 2014 Share Posted March 22, 2014 I'm interested in the stableness of E3. I know Clays pressure spikes all of a sudden above a certain threshold that's why I've always just used it in low pressure rounds like 38 Spl & 45acp. Link to comment Share on other sites More sharing options...
bowenbuilt Posted March 22, 2014 Share Posted March 22, 2014 (edited) I am half way through my 3rd 8 LB. jug of it. I have run 124 grn. plated HP's to 1200 fps+ in 9mm and 180's in .40 up 1000 fps with it looking for exactly what you are describing. So far I haven't found it yet, I am not recommending anyone do this I was just curious. In my guns for .45 ACP it takes 4.4 grains to make a touch over major with Xtremes 230 HP's and 3.9 grns to make major with the blue bullets or Bayou's 230 grn coated. Your gun may take a tenth or two plus or minus but for the most part it loads very similar to Clays with no ugly surprises. I have not found it to be temperature sensitive at all. Edited March 22, 2014 by bowenbuilt Link to comment Share on other sites More sharing options...
jstagn Posted March 22, 2014 Author Share Posted March 22, 2014 Thanks, have you noticed any recoil differences with the Bayou vs. plated, both making major, since you are using less powder with the Bayou? Link to comment Share on other sites More sharing options...
bowenbuilt Posted March 22, 2014 Share Posted March 22, 2014 It will make major at 4.2 with the plated bullets but doing a little experimenting it cleaned up considerably at 4.4 which actually makes 175-6 but it was more accurate, cleaner and I couldn't tell much of a difference in recoil adding 2 tenths. This sounds kind of crazy but for me the plated load feels softer. You try it and tell me what you think. Because both bullets are making major with the same powder it would logically seem that the coated loads should be a tick softer but not for me. I would be interested in what others have found using e3 and the different bullets. Link to comment Share on other sites More sharing options...
jstagn Posted March 22, 2014 Author Share Posted March 22, 2014 You would think with less powder yielding the same speed as the plated that the Bayou would feel softer, just shows that you have to experiment, with different bullets, powder and even primers and even different guns. Link to comment Share on other sites More sharing options...
Russellhjoy Posted March 31, 2014 Share Posted March 31, 2014 This sounds kind of crazy but for me the plated load feels softer. You try it and tell me what you think. Because both bullets are making major with the same powder it would logically seem that the coated loads should be a tick softer but not for me. I would be interested in what others have found using e3 and the different bullets. Funny you should mention that, I've noticed plated generally has the "best" recoil pattern of all the bullet types at the same PF/same powder, but jacketed to be the worst (by far) and moly in the middle just behind plated. It feels like the jacketed are too sharp, moly too sluggish, plated just right. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now