midvalleyshooter Posted March 7, 2014 Share Posted March 7, 2014 Who used the swage on their 1050 to detect 45 ACP SPP brass? I try to sort it before reloading but some SPP brass seem to always make it in with the LPP brass. Thanks, Keith Link to comment Share on other sites More sharing options...
SPRSkip Posted March 7, 2014 Share Posted March 7, 2014 I do. I made a link with a switch that sets off a buzzer Sent from my SCH-I605 using Tapatalk Link to comment Share on other sites More sharing options...
Mbauer67 Posted March 8, 2014 Share Posted March 8, 2014 I do. I made a link with a switch that sets off a buzzer Sent from my SCH-I605 using Tapatalk Please with us how you did this. Pictures. Link to comment Share on other sites More sharing options...
SPRSkip Posted March 8, 2014 Share Posted March 8, 2014 I do. I made a link with a switch that sets off a buzzer Sent from my SCH-I605 using Tapatalk Please with us how you did this. Pictures. Link to comment Share on other sites More sharing options...
davepoloman Posted March 8, 2014 Share Posted March 8, 2014 thank you for sharing the video Link to comment Share on other sites More sharing options...
KnurlingTurtle Posted March 8, 2014 Share Posted March 8, 2014 That's pretty great. Link to comment Share on other sites More sharing options...
midvalleyshooter Posted March 8, 2014 Author Share Posted March 8, 2014 (edited) SPRSkip Could you share what hardware you used to make this? I'm an electronics guy so I can figure that stuff out. I'm curious on what you used to make the plunger assembly that detects the SPP brass. I'm assuming the size is such that it enters the flash hole on LPP brass. But is pressed down by SPP brass which activates the plunger button which completes the circuit and turns on the light (or buzzer if you wanted). Am I right? Thanks in advance, Keith Edited March 8, 2014 by midvalleyshooter Link to comment Share on other sites More sharing options...
SPRSkip Posted March 8, 2014 Share Posted March 8, 2014 You are correct. Its just a home made spring loaded plunger that set off both a light and buzzer. I plan to assemble a package to sell along with my other press parts but have not had the time to do it yet. It has to be adjustable as there is a fine line between a small primer pocket and a large primer pocket with a little carbon build up along with other press adjustments. All that said it works great. Link to comment Share on other sites More sharing options...
midvalleyshooter Posted March 9, 2014 Author Share Posted March 9, 2014 Thanks again SPRSkip. Here is a link to a 1050 SPP brass kaboom over on Calguns--> http://www.calguns.net/calgunforum/showthread.php?t=902801&highlight=1050 Link to comment Share on other sites More sharing options...
DougCarden Posted March 9, 2014 Share Posted March 9, 2014 You can leave in the large swage rod and adjust it up so you will feel the small primer brass on the down stroke as well.... DougC Link to comment Share on other sites More sharing options...
Mbauer67 Posted March 20, 2014 Share Posted March 20, 2014 That is a really trick idea, well done. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now