DrLove Posted April 29, 2013 Share Posted April 29, 2013 Steelmaster owners, have you use factory loads on this? does it work ok with all ammo? Have you tried any major loads too? Link to comment Share on other sites More sharing options...
The Captain Posted April 29, 2013 Share Posted April 29, 2013 I shoot off the shelf 9mm in my Steelmaster. All makers work fine. I have had it tuned by a local gunsmith but it runs great at USPSA matches and fun shoots. I have been shooting it about 3 years now. Mine is set up with a steel guide rod and a 9 pound spring. I do not use the recoil master. Major loads will shoot but the compensator is made for minor loads. The Captain Link to comment Share on other sites More sharing options...
cecil Posted April 29, 2013 Share Posted April 29, 2013 Steelmaster owners, have you use factory loads on this? does it work ok with all ammo? Have you tried any major loads too? I have shot factory Remington, Winchester (white box) and both ran fine... my Steel Master also eats my re-loads .. which is: 5.0 Gr WST powder -- 124gr JHP Precision Delta bullets.. small pistol primers.. mixed brass.. COL - 1.15 --- 1011 FPS - 125 P.F. Link to comment Share on other sites More sharing options...
Parallax3D Posted May 2, 2013 Share Posted May 2, 2013 The Steelmaster is designed with Steel Challenge in mind. Since most Steel Challenge shooters are shooting minor power factor or less, (Steel Challenge rules only specify the minimum velocity, not power factor), factory loads should be more than enough. USPSA Minor power factor is 125, but most factory 9mm loads are closer to 140. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now