mcoliver Posted August 26, 2004 Share Posted August 26, 2004 Especially under flourescent lighting, is there a product out there I can apply in the lense of the cmore to reduce reflected glare? Also, using a gray body, I seem to be having more glare than one with a black-colored body. I'm thinking it's not the overhead lighting that's being reflected but the body area immediately in front of the diode? Thanks. Link to comment Share on other sites More sharing options...
BSeevers Posted August 26, 2004 Share Posted August 26, 2004 There is a little "hood" that replaces stock one. It works along with turning down Dot. Link to comment Share on other sites More sharing options...
batangueno Posted August 26, 2004 Share Posted August 26, 2004 McO, get the Limcat CMore Glare Shield. Link to comment Share on other sites More sharing options...
mcoliver Posted August 26, 2004 Author Share Posted August 26, 2004 Oh, is that what it's for? I thought it was just added protection for the dot module. Thanks guys. Link to comment Share on other sites More sharing options...
Eye Cutter Posted August 26, 2004 Share Posted August 26, 2004 have you tried putting masking tape painted flat black after the diode? this might cut down the glare hth Link to comment Share on other sites More sharing options...
blackdragon Posted August 26, 2004 Share Posted August 26, 2004 You could also call C-More and get a black battery cover! Ivan SCS Vegas Link to comment Share on other sites More sharing options...
blue edge Posted August 27, 2004 Share Posted August 27, 2004 anyone try a black target paster? Link to comment Share on other sites More sharing options...
mcoliver Posted August 27, 2004 Author Share Posted August 27, 2004 have you tried putting masking tape painted flat black after the diode? this might cut down the glarehth Now why didn't I think of that? Thanks doc. You could also call C-More and get a black battery cover! Overseas call is too expensive. Shot them an email 3X though, not a single response. Link to comment Share on other sites More sharing options...
Dream Posted August 27, 2004 Share Posted August 27, 2004 Keep trying them. sometimes it takes 3 or 4 e-mails before they respond. good luck Link to comment Share on other sites More sharing options...
mcoliver Posted August 28, 2004 Author Share Posted August 28, 2004 Really appreciate all the replies guys. Last night I was fiddling with it noting which spots were reflecting too much light. It then occured to me it might be the cellulose tape I used to cover the face of the module (so it won't get dirty and mess my dot again). So I removed it and the glare was gone. So I guess cmore did it right when they designed that thing with no reflective cover, huh? ...some things you just can't leave alone... Link to comment Share on other sites More sharing options...
Eye Cutter Posted August 28, 2004 Share Posted August 28, 2004 hahahaha!!! Are you shooting the Level I tomorrow? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now