bradhe Posted June 4, 2012 Share Posted June 4, 2012 I have had a ton of trouble with a small primer 1050 loading 9mm and 38 super (My large primer 45 acp machine runs fine). I would get 5-10 sideways, crushed or missing primers per hundred. Been through every trick in every thread in this forum. Decided to try the theory of the new primer slide when I takled to Dillon. The guy on the phone didn't know about it, but put me on hold and went and checked, and sure enough, there is a new one. He even sent it for free. I haven't mwasuerd it carefully, but the obvious difference is the chamfer in the primer hole is much less than the original one. Loaded 500 hundred rounds yesterday with only one tilted primer. Yeah!! Link to comment Share on other sites More sharing options...
Will_M Posted June 4, 2012 Share Posted June 4, 2012 How new is your machine? I've had few flip on me lately and I think this might be the issue. Link to comment Share on other sites More sharing options...
bradhe Posted June 4, 2012 Author Share Posted June 4, 2012 2 years maybe. The difference between them is obvious. The old one has a deep and pronounced chamfer, the new one only slight Link to comment Share on other sites More sharing options...
Silver_Silver Posted June 9, 2012 Share Posted June 9, 2012 I have called them 4 times after reading here that there is a new primer slide. Every time they say nope we have not changed anything on the primers of the 1050. Do you have a part number off your invoice? I have always had primer issues and this sounds like the fix. Link to comment Share on other sites More sharing options...
tleddy Posted June 17, 2012 Share Posted June 17, 2012 YES please - the Part Number!! I have called them 4 times after reading here that there is a new primer slide. Every time they say nope we have not changed anything on the primers of the 1050. Do you have a part number off your invoice? I have always had primer issues and this sounds like the fix. Link to comment Share on other sites More sharing options...
jmorris Posted June 17, 2012 Share Posted June 17, 2012 I have one of the "new" ones but it is the same as the one that's already in my 4 year old 1050. Link to comment Share on other sites More sharing options...
bradhe Posted June 19, 2012 Author Share Posted June 19, 2012 I am out of town at the moment, but will look and see if I have the peperwork when I get back Link to comment Share on other sites More sharing options...
bradhe Posted June 24, 2012 Author Share Posted June 24, 2012 Unfortunately I pitched the paperwork that came with it and the trash is gone. I did manage to get a picture of the difference so you can tell what you have Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now