-
Posts
265 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by unclez
-
-
Mine does the same thing on occasion. Some days I take it out and it will work fine, the next time I use it I may get a lot of the "Trigger-Screens Together" Error and the next time I use it I may get the Error just upon putting it in Chrono Mode as you are. It is a older XP though. Took it out last week to check some loads and got the same thing so I said the heck with it, packed it up, went straight inside and ordered a CED.
I'll use the main unit as a timer so if anyone needs a spare set of skyscreens and 24" mounting bracket let me know.
-
So I don't understand? Should I post my girl friend photo ? or my wife?
Sounds dangerous to me
It is normally only dangerous if they meet
Or theres that .01% chance it could be a good thing.
-
Size it then measure the inside diameter and let us know what it reads.
-
Since my front was sitting to the right (from factory) I pulled the pin and moved it to the left and loc-tited it. Probably won't last long but when it comes loose I'll use the set screw method as described above.
STI makes great pistols but I really have to wonder about their QC. The rear was also loose when I got it. Kinda stinks to pay that much money on a pistol and have to spend a couple of days fixing what they let slip through.
-
I haven't had any trouble with the Winchester small primers in the pickup tubes nor the magazine. You are using the correct size tubes right?
-
One more.
Had to crop it off at the bottom (the pic that is) for the sake of children
-
Thanks TL.
She has her moments
-
My wife of 19 years.
-
Lot's of VERY lucky guys here.
I'll see what I can dig up
-
I've never used anything but the Dillon so I can't compare it to another but I have no complaints with it. Works great.
-
Paint thinner works great as an additive.
On a side note: I bought some brass at a gun show today that had been tumbled with cat litter.
-
I put a jam nut on mine to keep the plastic wing nut from backing out.
Zack
-
Thanks guys. Man I hate to start scratching up a $1800. pistol. I may have to think hard on a Ghost or similar holster.
Zack
-
I know that kydex is pretty rough on blued guns but how does the hard chrome stand up to it?
-
It's pinned.
-
Is there anyway to adjust the front sight without having to send to a GS? Mine is setting to the right about a 1/16". No big deal really but it annoys me
-
Yeah, that is a 140mm mag with a Dawson +2 on it. I bought it to try and put the +2 on a 126mm mag and found out that won't work as it will not seat in the gun.
I now have 3x140mm with Dawson +1 pads and an ICE magwell. I also stippled the frame and undercut the trigger guard.
Looks great! Looks like the Ice magwell took up some of the exposed mag that showed with the STI magwell. I just ordered a Edge this morning so I was just curious.
Zack
-
Installed a new trigger so I needed new pics! My STI .40
I will be getting a new Dawson ICE magwell later this month to use for USPSA as well, blue to match of course!
Is that 140mm mags you have?
-
i'm going with 9 mm, extra rounds and lot of A's.
lynn
You mean ONE extra round. You can have 9 in a mag, as opposed to 8 in 45acp.
10 in the mag +1 in the chamber
lynn
Where are you getting 10rd 9mm mags?
I'm curious as well. I've heard the .38 super mags would work but how reliable are they in the 9?
-
Yea, I use the Pact with PAR times. Was just wondering if anybody used anything different other than a that.
-
Just curious as to what most people used to time their draws, reloads, etc.. during dryfire?
-
Ordered the 771's and received them a couple of days ago. Very well made and I really can't see how the mags could easily fall out. The only thing I see is the tension screws may need some loctite to retain them as when they are adjusted to where I get a smooth release the screws feel like they could back out really easy. Or maybe instead of loctite, just remove the washer at the head of the screw and replace it with a rubber o-ring to help retain it.
Thanks for the info on these.
Zack
-
Proven time after time that "once a thug, always a thug".
-
Use at your own risk of course.
3.4 Clays
124 Zero FMJ
WSP
1.145
Avg. Vel. - out of 5" Trojan 9mm - 994
What Bullet Do You Reload?
in General Reloading
Posted
I use Zero JHP's in my blasters. My Edge doesn't like flat nose very well so I can't use the PD stuff. Plus I get slapped with the State Sales tax through PD (7%). If they ever come out with a JHP I may have to try them though.