SJBriggs
-
Posts
215 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by SJBriggs
-
-
Fast forward to 3:20 for a speed comparison between the Dillon and DDA plates.
-
Good to know since I just ordered one yesterday! A buddy of mine got one and said that for 9mm, it runs fast and flawless. Zero mis-fed casings. What's not to love? When it comes to reloading, I'm all about efficiency -- especially if that efficiency is only $40!
-
1 hour ago, Bakerjd said:
They don't have anything for em. I don't get it though. They just released this holster like a year or so ago.
Yeah, I know a bunch of people who switched over to that holster. They're pretty popular here in SoCal.
-
12 minutes ago, Robertwil18 said:
They are no longer making or selling it. They are working at getting away from most competition gear entirely it seems. I called for support with mine and they pretty much said, "sorry, we dont have any support for that product anymore. Best of luck."
That's too bad considering the poor quality of their duty holsters these days.
-
Anyone know why this holster is no longer on Safariland's website? It's a great holster.
-
1 hour ago, AHI said:
Can they be loaded? Yes
Should they be loaded? Have you ever seen a magnesium fire?
The cases have a coating. once the coating is removed. They can ignite.
One time wet cleaning removes the coating. 3 times cleaning with corn/walnut
removes the coating. Up to you.
The cases were from some mystery .40 cal that I had. Didn't want to just toss the ammo, so I pulled all the bullets with the intention of using the primed cases for my reloads. That said, they haven't been cleaned at all.
EDIT: A more in depth internet search resulted in me tossing my primed aluminum cases in the trash. Not worth it.
-
1 hour ago, Rustygun said:
Very high failure rate when reloaded. Might have Problems with neck tension and crimps. Doubt they would damage extractor as they are much softer than a hardened metal component.
why reload aluminum when there seems to be an ample supply of surplus brass at many ranges?
Because they have primers in them!
-
Are they safe to reload? And, more importantly, are they safe to shoot in a 1911, or will they damage extractors?
-
Another consideration -- although I don't know if it applies to the RL1100 -- is that with my XL750, I had to spend a little extra cash to get it to run the way I wanted. It seems that with the Apex 10, you set it up and go. There doesn't really seem to be that many "upgrades" to the press, as everyone that I know who owns one say they are solid right out of the box. Any possible upgrades that go into the Dillon machine will only get me closer to the cost of a Apex.
As for automating, it seems that with the extra station in the Apex 10, that machine may be hard to beat. But still, that priming system...
-
It's that time. I'm looking for an addition to the family and want an upgrade from my XL750. It's been a great machine, but I want a smoother running press with more die space and the ability to automate. I love the fit and finish of the Apex 10, but the priming system makes me hesitant. The RL1100 looks to be a huge step up from the XL750, but the build quality seems to be on par with my current machine. Has anyone purchase an RL1100 and wish they picked up an Apex 10, or vice versa?
-
47 minutes ago, aandabooks said:
They are $99 on Amazon shipped anywhere with Prime. After tax they were just over $105.
Currently unavailable on Amazon, but I'll keep checking.
-
On 11/23/2021 at 11:45 AM, jackntucson said:
Action Target has them in singles or variety pack https://shop.actiontarget.com/content/ipsc-hc-kit-hard-cover-ipsc-cardboard-target-variety-pack.asp
Shipping cost alone is $98 to the left coast.
-
1 hour ago, tenx100s said:
Starting from scratch I reassembled the press this weekend according to the information I posted and have been loading small batches of 5 rounds. It's a pain but I was getting most of my primer misfeeds at the end of the primer stack so this is how I'm testing it out. Getting the primer punch flush or below the bushing and the shuttle to center up at its pick up position seemed to solve the problems at least until it got down to the last two of three primers. Getting one primer to drop cleanly and having a primer backup rod long enough looks like it has cured the "Last three misfeed syndrome." I think I've done 5 or six batches without a glitch. That would "interpolate" to 500. I'll run another half dozen or so batches of five tomorrow followed by a batch of 50. If there are any issues I'll let you know.
I expect to be able to load 100% without primer feed issues. The primer manufacturers produce primers to some pretty tight tolerances which should make this process predictable.
I mentioned earlier that years ago I started depriming my brass and then cleaning in a wash tumbler with pins. That keeps so much debris out of the press. It you run a Hornady Ammo Plant or other press that has a straight line primer shuttle that dead ends in its prime position that debris can be a pain. The Hornady was easier to clean even if it failed than the Apex is so I will continue the habit and raise my production expectations.
I process my brass the same way. Now that I started de-priming my brass, then wet tumbling, I get ZERO high primers. Add a Rollsizer to the mix, and things really run smooth.
Thanks for the detailed write up. After seeing an Apex 10 in person, I've been eye balling one pretty hard, but I'm hesitant due to the priming issues. It took a few months, but after getting my XL750 dialed in, I have pretty much no issues and can run thousands of rounds without any hang ups. I don't mind tinkering with the Apex as long as there is a fix for the initial set-up problems. If I can't get it to run as reliably as my 750, then I may have to reconsider.
-
So, is it safe to say that your Apex 10 is running well? How many rounds are you able to load without any issues?
-
Just a quick update on the Otto Range SA ears I picked up a few weeks ago. I wore them all during Area 2 over the weekend, and they were great. Sound quality is second to none, and the noise suppression seemed just fine for an outdoor match. They are a bit bulky, but the build quality is so good that I don't mind. The gel cups on these are a little bit stiff, and I was worried that they would be uncomfortable after wearing them all day, but this wasn't the case. They were comfortable for all day wear.
-
I plugged in my commercial roll sizer, and started rolling brass. No adjustments needed, and it works flawless. Looking forward to picking up their de-capper.
-
6 hours ago, Derrick67 said:
I use this one. Basically a Dillon but CNC machined with tight tolerances and very precise.
https://xrayparts.it/en/measuring-equipment/2311-powder-dropper-mk2-x-ray-parts.html
Damn, that looks pretty nice! Never seen that one before. Is there no failsafe rod/ assembly needed on that, or is it somehow self contained?
-
On 11/6/2021 at 10:12 AM, Jeremyc_1999 said:
Thanks for the initial review. Please keep us posted. I’m looking for electronic ear plugs as my sordins are a bit warm in the summer heat and I can’t quite bring myself to spend the money on custom molded plugs
I only got the outer ears, not inners. I may pick up a set of their inner ears. I have the same problem with the California sun heating up my brain when wearing outer ears.
-
First impression of Otto Range SA outer ear pro is pretty good so far. They seem to be very well built, not like the Walker and Peltor junk. Sound quality is some of the best I've experienced. At 23NRR, they may be a little loud for a semi-enclosed range with 24 shooters, but the seal seems pretty good.
-
1 hour ago, Boomstick303 said:
With the OTTOs and the Comply P-Series foams I have worn them three straight days for 10-12 hours a day and they do not hurt my ears, irritate them. In fact I forget they are there at all. I am usually in the car driving home before I remember to take them out. Hope they work the same for you.
They smoke any over the ear hesring proection i have I have tried in regards to comfort.
I ordered the Range SA - the over ear protection, however, everyone has a lot of good things to say about the micros so I may give those a shot also.
-
41 minutes ago, Boomstick303 said:
If you get OTTOs you may want to check these out. I prefer them to the ones That came with my OTTOs.
Also, keep chemicals off the rubber control buttons. Sunscreen, wet wipes, and/or bug spray could possibly damage the rubber. I disintegrated the rubber buttons my first set because I was cleaning them with Wet Wipes. OTTO warranties them even though they didn’t have to.
Hey brother, thanks for the tips, but when I click on that link it's for a set of outer ear muffs, inner foam inserts, and a "bad dragon dildo for women"! I bought all three...
-
Ordered a pair of Otto Range SA. I'll post a review after I've worn them for a couple weeks. Thanks all, for the replies!
-
12 hours ago, TheChewycookie said:
Any particular reason to use not use non-electronic earpro like foamies combined with simple earmuffs?
As someone indicated above, wearing inner ears is pretty uncomfortable when it's in all day, five or six days a week. Maybe I just haven't found the right ones, but I believe that it's mostly because my ear cartilage is a little messed up from my time in the ring. I have read that wearing inner ears still causes damage to the ear drums, despite having good noise reduction. Apparently, the slight vibration from loud noise causes damage to the inner ears -- even when wearing muffs. Need to do more research on this.
19 hours ago, ima45dv8 said:Pro Ears.
Tried a pair today that belonged to a buddy. Not super comfortable, and the sound quality wasn't all that. His were about sever or eight years old, so maybe they are different now.
I forgot about the Ottos. I'll look more into those, thanks! I also checked out TCI DEHP, but only 21 NRR; and Liberator HP 2.0, but they have mixed reviews and I wasn't too happy with the first version.
Another option is the Ops-Core Amp with their plugs. Great NRR and really good reviews, but if the plugs don't work for me, that's a steep price to pay!
-
6 minutes ago, rowdyb said:
Because few individuals want to pay how much those somewhat competing criteria would cost to manufacture.
Which is retarded considering how much money every shooter invests in this sport! Paying $300 + for good hearing protection is a drop in the bucket compared to any comp gun or reloading set up.
First Impression--DAA Turbo Case-Feeder Plate in my Dillon Case-Feeder
in Dillon Precision Reloading Equipment
Posted
Just got my DDA plate which I threw on my newer variable speed Dillon case feeder. With .40 cal, the case feeder is now WAY more reliable. Absolutely no jamming issues like I had with the factory Dillon plate. It also spit out the brass so fast that it would trigger the automatic shutoff switch enough to make it seem that the case feeder was getting bogged down. I may end up disconnecting it. I used the case feeder for both my XL750 and a commercial Roll Sizer. Even with all six bolts installed on the Roll Sizer, there is no way that the Roll Sizer will be able to keep up with the case feeder.
Assuming that the plate works just as well for 9mm, the real benefit for me is in the reliability factor and being able to use one plate for both calibers. $40 very well spent.