MRBerg
-
Posts
120 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by MRBerg
-
-
I have one I just got it a little to late in the year it was used needed to work up loads and get it shooting for me you shooting steel or open I'm going to shoot open with mine right now the weather in Iowa isn't very friendly to be outside
Ron
-
there are two things that make a bullet tumble twist rate and how long the bullet is you need to know what your bbl. twist rate is check and see how long your bullet is the way it sounds to me is your bullets are longer then what you have used in the past hope this helps
Ron
-
I run a 11.5 in my Shadow 2 no problems I did put the longer firing pin and spring kit in mine works great
Ron
-
5 hours ago, Superkaratemonkeyfighter said:
Anybody know the size dimensions compared to a cz75 recoil spring ?
I would like to try one but they only have them for 1911/2011.
Looking for mostly the OD,ID I guess.
length could be trimmed if it’s longer.
CZ has a smaller ID /OD not sure how much but my 1911 and 2011 are much bigger
-
kind of what I figured Thanks for the heads up
Ron
-
anyone tried one of the imported ( clone ) Cmore scopes you see on eBay from China/Hongkong I know chances are there cheep like the price
Ron
-
got it they work fine now Thanks
-
2 new mag's have gram guts in them the slide lock is staying open with one round still in the mag can I just cut off the tab from the follower
-
how long your bullet is will make them tumble and the twist rate look up your set up on the Berger bullet website to make sure your bullets will stabilize in the twist rate your gun has
hope this will help
Ron
-
one more question I shoot 9X19 only does a gen 1 work better then a gen 2 ( 9mm / 38sc ) for 9mm only I'm just new to the 2011 and looking for some heads up info. as I get started
Thanks Ron
-
I have a Steel Master in 9mm what's your go to mag gen 1 or gen 2 or MBX and why
like some input before I dump a pile of cash into mag's
Ron
-
hit your thumb one time and you will know why ( ps it hurts )
-
amazon they have every size and power you want
-
On 7/30/2016 at 4:14 PM, jcc7x7 said:
STI told me about a year and half ago to "go ahead the gun can handle it, with a 9 or 10 lbs recoil spring it"
I ran mine at major all last year with a 9lbs spring, which kept the dot flat with my load.
I was just told the same thing by STI change springs to a 9 or 10 pound you can tell witch spring to use by the one that lays the empty brass 6 to 8 feet from you
-
got her all cleaned up bead blasted it looks brand new it was over an 1/8" thick in bottom Thanks for all the help and tips this is my first 2011 I haven't even got to shoot it yet
Ron
-
I'm getting it slow but sure man its thick Thanks for all the help
Ron
-
1 hour ago, N3WWN said:
You didn't mention what you soaked it in...
I soak mine in Kroil and it really helps. After an overnight soak, I use a brass punch to remove the bulk of the build up and it breaks away from the metal. I then use a needle file to gently clean the rest out.
Wipe out bore cleaner not the foam
-
I take it you plug the bore before blasting to keep it out do you tape off the outside so you don't mess up the finish Thanks in advance
Ron
-
trying to clean the carbon build up out of my comp. any slick way to do it the carbon is hard as a rock ! tried soaking it over night no luck any info. would be great
Ron
-
just started shooting handguns again picked up a CZ Shadow 2 shot my first IDPA match then my first USPSA match great bunch of people had lots of fun I wasn't last but close
Ronnie
Any opinions on STI DVC S?
in Open Pistols
Posted
starting out with minor to get used to the gun and red dot then will switch to major I will shoot it in USPSA maybe some steel