[Aimcam and Earpro]

I use aimcam and msa sordins, no discomfort at the Kentucky sectional which was around 9-10 hours match with glasses and muffs on. 

[Shielded thumb safety]

On 6/20/2020 at 6:18 PM, echotango said:

Anyone have a pic of a doubletap at a similar angle as I have above? 

 

This happened today. 

 

 

[Looking for 1911-like PCC Trigger]

Ar gold if .223 hammer height works with cmmg bolt go with it, if not you can pick .308 hammer .004 taller or pcc hammer .008 taller than .223 hammer

[Atlas chaos issues]

12 hours ago, TANFARM said:

So after all this hoorang .....the original poster was not satisfied with his initial service. He was contacted by Atlas and returned the pistol for further evaluation. At this point , blame not relative, the problem was solved and owner shooting passers. Done and done....yikes.

you leave out a couple of key details but paint the picture however you see fit. 

[38sc sizing dies?]

2 hours ago, AverageJoeShooting said:

this is in 9mm though correct? 

 

 

Correct 

[38sc sizing dies?]

I had extreme bullet setback in the first 50 rounds I loaded with mighty armory die. I spoke with Wayne twice and he is extremely knowledgeable and very helpful I really wanted this die to work. We got the setback to only 10 out of 100 rounds but imo that’s to much risk for pressure spikes.  I know some people have had good success with them but I know a few others have had my experience.  
 

Bench test my start oal would be 1.165 and push in to 1.10 with ease. Gun test 1.165 to 1.14s 
crimp is .375-.378 

[Best shoe specifically for gravel?]

Inov8 mudclaw or x-talon 

[WAC or WSF for PCC?]

30 minutes ago, mgkrs said:

What about plated or coated?

Plated would be fine

I’ve never loaded coated 
 

I stay away from exposed base bullets when using a comped gun. 

[WAC or WSF for PCC?]

6 hours ago, mgkrs said:

Right, but question still stands from original post - why use JHPs over RN for PCC? Don't think it gets hot enough to burn through the base and RN is much more reliable for PCC.

I use jhp because they are cheaper than tmj and cmj. I had bad experience with fmj clogging my apa comp after 500 rounds. After 2k rounds of fmj, I could feel a difference in recoil from my mbx comp starting to have lead build up in the ports.

 

I never had feeding issues with my shooting innovations barrel or mbx barrel in 40k jhp rounds last year.

[WAC or WSF for PCC?]

4.6 gr wsf with a 115gr jhp and spp is 138-140 out of my 14.5 shooting innovation barrel. Great feel, use it for uspsa and 3g.  

[2011 MBX mags... Is this normal?]

It’s completely normal as the mags are stamped and hand finished. You can email Adrian at mbxextreme@gmail.com or myself at brook.mbxextreme@gmail.com

 

here are some photos of my match mags all run flawless without any issue 

[Venom Customs!?]

Those old school sti cuts are what dreams are made of...

35 minutes ago, BigBamBoo said:

Just received my latest open rig from Don.

As with my last rig...Don knocked it out of the park. Beautiful work!

This one is a "middy" in 9mm major.

My first rig is a full length.

I am very interested in feeling the difference in how it shoots vs the full length. They are pretty much the same over all length and the middy actually weighs a bit...only 3/10's of an once...more.

As everyone else has stated...Don does GREAT work.

Now to get the parts together for a third build!



 

 

[2011 Vise Block]

7 hours ago, redwoods said:

Good idea, never seen a 2011 dummy mag. Any idea on where to get one or who makes it? I have an old mag and maybe I will fill it with a plastic to make sure it doesn’t deform in the vise.


Sent from my iPhone using Tapatalk

double alpha has one coming to market soon

[Aluminum mag catch with steel MBX glock mags?]

Aluminum is fine with the steel mags. I used the factory qc10 mag catch during testing for around 8 months without issues. I only switched to test the fit of the steel qc10 fit. Plastic is the one that needs changed. 

[which lower did you use for your PCC ?]

Qc10 

[9mm Major Brass Life]

9 hours ago, jschroep said:

Anyone have experience with these? 

 

https://reloadinginnovations.com/products/spill-stop-for-dillon-650-1050

they are great in my 650 and 1050. I only use one in my 650 in station 3 and in the 1050 station 5 

[Iron City Rifle Works PCC arrived]

@bcp Holosun 510 or 512 cowitness for less height over bore. 45* offsets are slower than learning to aim for hard leans or switch hands. 

[9 major or 38 SC]

28 minutes ago, Balakay said:

Because shooting coated lead in a comped gun will give you Coronavirus

[Cci small rifle]

1 hour ago, AverageJoeShooting said:

How many poppel holes and how many holes In the comp?

2 3/16 and 2 it’s a sv comp 

[Cci small rifle]

this was 8.5gn hs6

115gn jhp v2 everglade

small pistol primer #500

1450fps and 167pf

 

switching to #400 primer got me in the 1500-1520fps range with the same load

[Cci small rifle]

Granted I load 9 grenade I only use cci small rife #400

[Out of the box BEST PCC FOR YOUR BUCK]

https://www.ssusa.org/articles/2020/3/3/top-pcc-guns-in-2019/

[What is the best ultrasonic solution to clean the comp?]

I like lucas ultrasonic cleaner followed by the punch hammer and scrape method 

[Shielded thumb safety]

I use atlas high ride ambi, I have big hands and have yet to accidentally flip them on accident.

[Split limit for CED pocket pro 2?]

3 hours ago, CHA-LEE said:

On the Pocket Pro II You can adjust the shot dead time down to 0.05. The default is 0.11.

 

Did you try reading the manual? 

what does turning the echo down do beside picking up faster spilts? Does it add to the chance of more false readings?