[Any game with CZ’s and carry their compacts?]

My production gun is a SP01 and I carry a P01. 

[SP-01 bent guide rod]

I replaced my SP01 guide rod with a CGW rod and 13 lb spring just because I didn’t like how flimsy the factory was but it worked. 

[Beretta 92 Compact for EDC?]

Well I ended up buying a CZ P01 since it’s a little slimmer and shorter. 

[Beretta 92 Compact for EDC?]

1 hour ago, shooterDrew said:

I have a JM custom kydex AIWB holster for my full size 92. It is the most comfortable concealment holster I’ve got. The full size is definitely a brick of a gun but the holster makes it very comfortable and conceals very well. I’d love to see what it would do to a 92 compact. I think that would be a very concealable option.

 

 

Sent from my iPhone using Tapatalk Pro

 

That’s awesome I will order the one of those holsters. Thanks! 

[Beretta 92 Compact for EDC?]

Love my M9A3 and have been looking at the 92X Compact for another carry gun to go along side my STI Staccato C. Is the 92 Compact hard to conceal? Thanks 

[Replacement guide rod]

https://cajungunworks.com/product/75060-304ss-precision-recoil-spring-guide-rod-fits-full-size-cz/

 

I have this one. 

[M9A3 Comp and Red Dot Mount?]

I have a M9A3 and thought it would be cool to put a comp and red dot on it for fun. Question is who makes a good screw on comp for my threaded barrel and where can I find a rail mount red dot mount like the new Beretta Open gun? 

[SP-01 FTF Out of the Box]

2 hours ago, BHogan said:

 

Thanks Stuart.  Is the reason it's happening with a full mag likely because of the extra mass the mag spring is working against slowing it down? That seems to make sense.  I'll get that ordered tonight. +5%?

 

Also, what would you recommend on the recoil spring for most factory ammo, like 14#?  I'm running a 13# hammer spring. 

Iam using a 13# recoil spring with factory ammo. 

[SP01 CZ thin Aluminum vs Lok Bogies]

I ended up getting the CZ Custom aluminum grips. They offer a lot of grip. 

[Cz]

 

[SP01 CZ thin Aluminum vs Lok Bogies]

I ended up ordering the CZ Custom Mikro Pocket grips. 

[SP01 CZ thin Aluminum vs Lok Bogies]

Iam going to order some thin grips for my SP01 and can’t decide between the CZ thin aluminum vs the Lok Bogies? Which one is thinner? Does the Aluminum grips have enough grip/aggressive? Thanks 

[Sight Pusher?]

Can anyone recommend a good sight pusher? Looking to replace a couple of sights on my 1911’s. Thanks 

[Aftermarket extractor for RIA double stack .40?]

1 minute ago, sc68cal said:

I run aftecs in my open guns - they are good but require modifying your firing pin stop, and have their own pros and cons (spring caps can break). I had issues with a standard extractor in my 9major gun and switching to an aftec solved it, because I don't have the chops to fit/fix an extractor myself and was just looking for a part that would solve it for good. Other guns that have properly tuned extractors may not require one.

 

If you're shooting 40, to be honest as long as your extractor works, I don't think it needs replacing. Wait until it wears out and requires replacing - and then I'd go with what @N3WWN suggested - EGW makes good stuff. I don't run an Aftec in my limited gun

Just curious why you don’t use a Aftec in your Limited guns? 

[Aftermarket extractor for RIA double stack .40?]

I have a Rock Island Pro Match Ultra HC .40 and would like to replace the extractor with a better made one. Nothing wrong with the factory one I just want to replace it with a quality one if there is one available? 

[13 lb .45 Recoil Spring in .40 gun?]

49 minutes ago, GringoBandito said:

Not a stupid question at all. As long as it's for the right length slide, it won't be a problem.

Yes it’s the same length 5inch. I figured it would be the same but was curious why the package said .45 acp and made me wonder if there actually was a difference. Thanks. 

[13 lb .45 Recoil Spring in .40 gun?]

Might be a stupid question but I have a Wolff 13lb recoil spring package that’s labeled .45, can I use it in my .40 1911? 

[Dan Wesson DWX]

There is a 12 page conversation about It on the CZ section. Check it out. 

[Rock Island TAC Ultra FS HC 9mm]

I actually just listed my Rock Island Pro Match Ultra HC .40 for sale. 

[Wilson 10 Round .45 mag and Dawson Ice?]

32 minutes ago, shred said:

As long as you have a Dawsin 'gap' insert.

 

Ok good that’s the insert I have. 

[Wilson 10 Round .45 mag and Dawson Ice?]

Just curious if the single stack 10 round Wilson Combat .45 mags fit without interference with my Dawson Ice mag well. Thanks 

[Tanfo and Polygonal barrels?]

Just curious about Tanfoglio claiming the polygonal barrel is more accurate etc. Is there any truth to this and if so why don’t more manufacturers besides Glock go this route? 

[STI 2020 Staccato Lineup]

2 hours ago, p7fl said:

Has anyone seen a price yet on the C2. thx.

I thought I seen a price for $1999. 

[STI 2020 Staccato Lineup]

26 minutes ago, Steppenwolf said:

I don't own a DVC (shot one a few months ago), but a Staccato XL 9mm was in stock at a local sporting goods store. It has a new style grip (still polymer), sub 3-pound trigger, and the fit of slide to frame seemed good. I have an Edge in .40. The Staccato slide cuts appeared relatively well-machined. But at $3400 it is overpriced to me. I know what I paid for my new Edge a few years ago and spending $1400 plus more for the Staccato XL is a no go (especially in 9mm). From what I can remember about the DVC, the Staccato has better fit and finish, but Uhmeebuh will have to give you the recent comparison details.

 

I have a Staccato C absolutely love it but haven’t handled any other Staccato’s or DVC’s. 

[STI 2020 Staccato Lineup]

31 minutes ago, uhmeebuh said:

I picked up a DVC-P (formerly the Omni) and I noticed a distinct difference in action and fit between the Staccatos and the DVCs.   The Staccato XL showed up at my LGS and confirmed my suspicions.  
 

What was the difference?