Jump to content
Brian Enos's Forums... Maku mozo!

Buck8154

Members
  • Content Count

    14
  • Joined

  • Last visited

About Buck8154

  • Rank
    Looks for Range

Profile Information

  • Real Name
    Buck Pierson

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. The DVC guns all had light triggers compared to the 4-4.5 lb triggers in the Staccato c/p. Also the majority of the dvc guns were long slides compared to the staccato-p which was a 4.15. Due to that, the staccato-p was sprung heavier. If you were to take the recoil systems out of the guns and put the slide on the frame and rack it back and forth you would see they are fit the same. The dvc-p always feels super smooth as that comp takes so much out of 9mm that it is sprun very light. We have only used DLC finish on all our 2019 guns, none were nitrided, cerakoted, or blued.
  2. The magwells are not part of the grip modules, they are attached to the grip module with the mainspring pin. You can run any aftermarket magwell you like. The previous tactical slim magwell doesnt line up well with the magwell portion of the g2 grip, and have we have therefore been testing some prototype magwells from Dave Dawson for the future.
  3. We went with the dpp cut for a few reasons...one it has the tallest base and therefore Has to sit the lowest in the gun in order to co-witness back up sights that arent ridiculously tall. Two, it was required for two contracts, the USMS SOG, and another mil unit as they run the dpp. Three, you cannot direct mount an rmr on a 1911/2011 slide as the bolt pattern on the rmr is too wide for the slide.
  4. I agree, but at the end of the day with edge sales dwindling down to hardly anything it was very hard to justify keeping it in production, even with an update, especially with such ling lead times on our models that were selling very well as we only have so much production capacity, and so many gun smiths. Perhaps after some time off, the competition market will grow enough that there will be a market for the edge, or something like it to come back Into the lineup.
  5. Thank you Sir, look forward to seeing you in Texas next time I'm in town!
  6. I only deal with r&d for the LE/MIL side if the company, I will certainly pass that up. Part of the reason was the absolutely abysmal sales of the edge prior to it being cut.
  7. We went with the dpp cut for a few reasons...one it has the tallest base and therefore Has to sit the lowest in the gun in order to co-witness back up sights that arent ridiculously tall. Two, it was required for two contracts, the USMS SOG, and another mil unit as they run the dpp. Three, you cannot direct mount an rmr on a 1911/2011 slide as the bolt pattern on the rmr is too wide for the slide.
  8. The P5 is not in production, and was never offered in a duo version. After testing carious barrel lengths with Dave Dawson and a certain military unit, we found the most reliable, flattest shooting size in 9mm duty ammo was the 4.45” barrel currently on the new P and P-DUO. We only discontinued models that weren't selling...had they been selling we would not have discontinued them. The R was approved for single stack by uspsa and ipsc last year at shot show prior to ever putting them in production. We aren't selling any $3500 tactical guns, let alone to LE. All of our LE guns
  9. New CEO is Nate Horvath, a Marine Veteran and lifelong firearms enthusiast...I assure you his only concern is producing a high quality, American made product! I would not have accepted his job offer to come on board if I did not believe that his intentions were true...I was making way more money contracting!
  10. STI is under new ownership and management. We currently make our own slides and frames from raw stock in house. The run of 1200 90% frames that Dasan made for STI a few years ago were made for overseas sales. The less than 5% of current parts that we currently outsource, are made by American companies using American materials. Our new owners, and management our addressing the QC issues of the past, as well as the customer service issues that plagued the company in the past...for example, I was recently contacted by a member of another forum who had issues getting his gun fixed
  11. yes it is, STI has not outsourced any parts to dasan in almost two years. If it is not marked dasan then it was not machined by dasan.
  12. As a disclaimer, I am new STI employee... STI does not use any foreign parts or materials anymore. Yes in the past they used some frames and slides that were partially machined from dasan, who also makes frames and slides for numerous other US firearms manufacturers, and even has a factory in Georgia. However under the new ownership of STI that practice has stopped, and all frames, slides, and parts a re machined from raw stock in house at their Georgetown Texas plant. If anyone doubts this is our current practice, come to Georgetown and I will take you on a tour of our facility
×
×
  • Create New...