Stmark73
-
Posts
86 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Stmark73
-
-
Thinking the same. Just want to make sure before I drill my frame for a thumb rest.
thank you,
Mark Santos
-
Hi,
With the new rule change, will a frame mounted thumbrest be legal in CO as long as it fits the box and makes weight?
thank you,
Mark Santos
-
I did an experiment of my own a few years back when I heard of the said accident.
Loaded my shadow2 with a primed case. Tapped the hammer with a rubber mallet.
With extended firing pin and reduced power firing pin spring, it popped the primer.With extended firing pin and regular firing pin spring, had to tap the hammer harder to pop the primer.
With stock firing pin and new stock spring, was not able to pop the primer.
But I still use the reduce power spring and extended firing pin.
Chances of pistol dropping on hammer is maybe 1 in a million.
thank you,
Mark Santos
-
The trs for the tso/ checkmate is different from the regular trs. The trs for the tso serves 2 purposes, for trigger return and trigger bar tension.
thank you,
Mark Santos
-
If you really want to get the S2 Orange, just get it milled at CZ Customs for their optic plate system. They have a cover plate with Rear sights, just in case you decide to stay with irons.
thank you,Mark Santos
-
For those that modified their Romeo 3max/xl to fit the czc optic plate cut. In my case, they replaced (warranty) my 3xl due to broken glass.
With regards to Leupold, my modified DPP (filed to fit a Shield RMS cut) has been sent in for warranty/repair for electronics problem. DPP was repaired but not replaced.
No idea yet for my modified FTP Alpha3, still waiting for it to breakdown.
thank you,Mark Santos
-
On 3/12/2021 at 10:02 AM, matteekay said:
Hey Mark,
Are you just matching the length of your current Grand Power spring? Or is there a certain number of coils you removed?
I cut 4 coil off the cz75 spring. It does not bind when removing the slide. You can also cut it the same length as the OE spring just make sure the OE spring is not collapsed.
I just left my cz75 recoil spring longer because I want it pre loaded. With the shorter original spring, the slide has the tendency to cock the hammer to the first notch when holstering.
The OE coils are spaced much wider compared to the cz 75 spring, so counting coils won't work.
Thank you,
Mark Santos
-
Can't remember how many coils I cut, I just made sure the coils were not stacking. I'll try to look for my old original black spring and compare it to my cut cz recoil spring. I'll count the coils as well. Will let you now later.
Thank you,
Mark Santos
-
On 12/30/2020 at 8:04 PM, QUIZZ said:
I have the X-callibur and want to put the Viper red dot optic on it but can't find an adapter plate? My rail does not have the cut out. Can you use the rear sight screw to mount the adapter bracket?
Before I got my xcalibur milled, I used the Master Class Custom Guns of UK mount for a K22. The mount does not have bosses and uses 4mm mounting bolts/screws to mount optic. It sits flush on top of slide with a little bit of overhang depending on what optic you are using. I was using a burris ff3 at the time.
-
A CZ75 recoil apring will work. You just have to cut coils to prevent stacking/binding. I use a 13# recoil spring cut to length for my milled slide with dpp pro.
thank you,
Mark Santos
-
I have both a lightened and a non lightened shadow 2 slide milled for CO. The lightened slide feels snappier for me compared to the soft recoil of the non lightened slide. I use 124gn bullets at 130-135 pf.
thank you,Mark Santos
-
On 7/3/2020 at 12:33 PM, kneelingatlas said:
I understand what you're trying to do, if you start with a TS barrel, thread it yourself and trial fit you can get what you're looking for
What I did was file about half a thread off from the compensator, now the clocking of the comp is perfect. The problem now, I have to file about 1mm off from the face of the comp. LOL
Thank you,
Mark Santos
-
6 hours ago, gianmarko said:
not sure what you mean. can you do half turns?
my comp fitted fine with no mods or work.
When the comp is screwed all the way in, the guide rod hole is clocked at 12 o clock (comp upside down.) The reason for that half turn out. I like it to be like the oe comp where the last turn tightens the comp to the barrel and not just the guide rod holding it in place.
-
For those that already received there sebo comp. Did your comp screw all the way in and lined up with the slide or did you back out half a turn to line it up with the slide? With my comp, I had to back out half a turn to line up with the slide. With that half turn out, the barrel/comp has a litlle wiggle.
thank you,
Mark Santos
-
You don’ t have to send it out for milling if you’re handy with tools(dremel). If it is a sp01, you just need to remove the raised portion in the front of the inside dustcover. Dremel first for the rough cut, then sand for final fitting. You may have to lap the slide to the frame just in case it is a tight fit.
thank you,Mark Santos
-
my CZ75 Open minor
-
USMCCHET. With the czc rds system. You can go back and forth production and co. Slide milling is now allowed in production.
-
Shadow 2 slide is not similar to the spo1 slide in contour and length. Plus you will have to remove the fpb to make it work on the shadow 2 which will make it illegal for carry optics and production division.
“22 Specifically prohibited modifications and features
Please note that the absence of an item in the list of prohibited modifications MAY NOT be construed to mean a modification is allowed. A modification is only allowed in Carry Optics Division if there is a rules clause or interpretation, which specifically declares that it is allowed in the Division.
Removing or disabling firing-pin blocks or any other factory safety mechanism in Carry Optics division is specifically prohibited.
Slide racking devices are prohibited, whether attached to the optic or not.”
thank you,Mark Santos
-
i know the quality of the DAA gears, it's just the tinkerer in me that urged me to buy the knock offs and modify them to my liking. I have both the Alpha X holster and race master pouches, still deciding if I would let go of the race master pouches for the Alpha x pouches. The knock off quality seems good but only time will tell, plus they are disposable so i could drill, file, sand and all the things that can be done to satisfy my needs. If everything fails, I still have my unmolested DAA holster and pouches.
Thank you,
Mark Santos
-
12 minutes ago, tha1000 said:
I prefer the racer pouches to the aluminum ones..
Yes, that is what I’m modifying the KO’s for. Putting plastic inserts on all side of the mag pouches with the left over insert from my DAA gear. If I like the feel of the inserts, then will go get the Alpha series and sell my DAA Race master pouches that is in standby.
After all the experimenting is done, I’ll have a back up gear for my back up CO pistol.Thank you,
Mark Santos
-
Don’t get me wrong, I like the DAA equipments. That is my current rig for Production/CO. Just contemplating on getting their Alpha X-series gear or go another brand.The knock off are a good candidate (cheap) for testing and modifying. I won’t modify my DAA gear just for the sake of resale value. If all is well with my mods, then I’ll get the complete Alpha X gear.
But for those that want to start in the shooting sport and don’t know what gear they would like in the future, the KO’s are a good start.That’s my opinion only.
Thank you,
Mark Santos
-
True, about the IP theft and buy once/cry once motto. But if you're just starting out and figuring out gears that would work for you in the beginning. It's not a bad idea trying out the those knock offs. In my case, I have a Production/CO rig and would want to try Limited/Open division in the near future. Those knock offs have gotten me to try my Limited/Open set up that's been in the safe for a while. If my venture in Limited/Open division flourishes, then I'll buy the DAA stuffs. Then I'll just relegate the knock offs as back up gear for my Production/CO rig for my other pistol.
Thank you,
Mark Santos
-
For those that are on a budget building there limited division rig. I found this at ebay.
It takes the DAA Inserts.
For the mag pouches:
-
Try re-clocking the comp/ sight block. It might be misaligned a very tiny bit. Happened to me once, slide will not close completely while racking. over tightening the comp to barrel was my experience.
thank you,
Mark Santos
Black nitride refinishing
in General Gunsmithing
Posted · Edited by Stmark73
Did you send your grip to H&M?
Did you have to go thru a 2nd party or sent it directly to them?
Planning on sending a frame and slide for black nitriding
thanks,
Mark