KUJayhawk01

I just wanted to add this for new reloaders, as i imagine the experienced already knows: My higher velocities with lower charges of Autocomp are likely the result of seat depth to 1.150", which is manual specification for this bullet, which is higher pressure. I think Markcic said he was seating his to 1.2", with many seating to 1.170" Around 1.165" it was causing feeding issues in my G19.

HI. Last post from 2011. Nice. I love searching before posting. Thanks for major load data! Odd cuz I have 124gr FMJ RN from Hornady #35577B. Hornady manual says max is 4.9gr for Autocomp = 1050 fps. I did 4.8-4.9gr, seated to 1.150" per manual. CZ Shadow 2, stock, so 4.89" barrel, no ports. Temp: approx 40 F, but i loaded it in room temp, approx 67 F. Kansas elevation, if this matters. FPS: 1110 1124 1117 1121 1108 1295 1118 1103 1110 1312 1160 1652!! (380 case! mixed with my 9mm. No signs of high pressure. I wish i took photo but i chucked the case away after inspection) 1108 1070 1128 1096 1108 1075 But these velocities are at 4.8-4.9gr. There are more figures but it's consistent around low 1100s 5.2gr of WAC, seated to 1.150 as well. Same Hornady #35577B bullets. 1299 1318 1302 1311 1302 1295 1313 1300 1302 1311 814? (sunny day) 5108 (bad measure) 1300 1101? (same?) 742 (same?) Traded a fellow shooter my reloads for five PMC factory 124 gr FMJ. It says "1110 fps" on the box. 1052 1084 1080 1085 1072 Hornady LNL auto progressive. Competition Electronics ProChrono #CEI-3800. Couldn't imagine what 7 grains+ of Autocomp will get me. Check out that .380 auto FPS! Primer looked curved. No pierce or extrusion. Rim looked good after extraction. So hot! Approx 4 ft from chrono. Diffusers installed.

What would you use to cut them?

Hi. Sorry to ask, but I did search for this answer. Maybe it's in the dawson video, but here it is: how do you fit a steel 9mm spacer? This thing looks beefy and strong! With a file? I got 170mm spacers so that I can fit it in a 140mm tube with ext base pad. Or do the 140mm spacers already come longer so that you can make such fitments? thanks!