Malarkey
-
Posts
331 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Malarkey
-
-
My remarks were in regards to the Arex line of Pistols : I don't do the competition shooting anymore. That was never my thing : I do appreciate the skill required to participate
What did you do to your Rex Zero?
Sent from my iPhone using Tapatalk -
Yes. And CZ or Tanfoglio small frame. Magazines are Mec-Gar.
This takes Mec Gar magazines? Are they the same as the CZ?
Sent from my iPhone using Tapatalk -
On 8/23/2018 at 1:31 AM, Maks_H said:
Yes I know for a fact that shipping is 7 Euros which is approx. 10 US Dollars.
Excellent, I just ordered a Alpha to try out side by side with my Stock 2 and Limited pro. Should be an interesting comparison. Make, if you don’t mind posting a website for where we can find current parts for these guns on here. I’m interested in seeing the new trigger, thanks.
-
On 1/7/2018 at 8:09 AM, johnbu said:
Those are exact copies, I sent her my factory wood grips in exchange for a couple copies of the plastic ones. You can stipple them too if you like.
-
On 4/21/2017 at 11:15 AM, HMFIC03 said:
My current load for a Wilson 16" fluted barrel (shorter throat)
135 FP Xtream ( I used these differentiate between my pistol (HP) and my wife's loads RN easily)
1.13 OAL
3.7 of Auto comp
AVG Velocity 998. - 134 PF
I have some loads worked up at 3.4 which I need to function test and chrono should put them at 125PF.
How do you like autocomplete foand 9mm minor?
-
Coated lead bullets are good to go in the factory barrels.
-
Thanks!
Sent from my iPhone using Tapatalk -
I'm in the market for two new pairs of shorts specifically for shooting and I want to see if there is anything out there that stands out. Please do not tell me about your 5.11 or True spec shorts, but if you know of something that is extremely underrated, or completely innovative I would love to hear about it.
-
Here are the stages, pulled from the facebook page.
-
On 2/26/2015 at 4:47 PM, dskinsler83 said:
My connector of choice has changed since this last post of mine. We use the LoneWolf now but I have a couple more im testing. The TTI connector is about .010" longer and some guns that you speak of can be a slight issue but if the reset is quick and snappy and the trigger breaks at the rear anyway then its no big issue. There are many ways to change where the trigger will break.
Why do you choose the lone wolf?
-
Yep, 2nd place at production Nationals was a G34
-
Love them, but be weary of over tightening them. They will hug your magazines and your reloads will suffer. I ran them for almost a year until they started contouring into my magazine channel, that's when I decided to go back to the metal scale 2.0s.
-
MBX has a pretty cool offset mount
-
On 4/15/2017 at 10:21 AM, Patrick Scott said:
Max did indeed use a 10.5 Faxon, permanently attached a Taccom comp and then permanently attached a steel pipe with holes drilled in it.
-
What have you found that works best in your PCC, powder and bullet weight.
Fast vs medium burn rate powder?
Light(115gr) vs Heavier(147gr) bullets.
Comment below.
Sent from my iPhone using Tapatalk
-
On 4/2/2017 at 1:43 PM, Flatland Shooter said:
Over on (heaven forbid) Doodie, Max indicated he used a "10.5 faxon barrel (shitty barrel btw, the chamber sucks)".
But he is running Taccom's comp on it.
That's not what he said on reddit when asked about it. Plus, looking at the images of his PPC from nats, there is only one 9mm barrel on the market like that.
-
-
Max Leograndis ran a Taccom ULW barrel on his pcc when he won nationals, I'd say they work pretty well..
-
Does anyone have any experience with the SNS 125 Grain Conical Nose? Particularly with a tanfo
-
On 3/29/2017 at 11:04 PM, latenightlegend said:
How does running lighter steel weights affect the recoil or dot movement?
Sent from my iPad using Tapatalk
I would say the reduction in moving mass would lower the felt recoil and dot movement. -
Ended up ordering the 12MOA dot cause there was a good deal on it, and once I realized you could swap out the diodes in them it made the decision a lot easier.
-
On 1/1/2017 at 11:24 AM, Aircooled6racer said:
Hello: I am using a 16" stainless Wilson Arms barrel on one of my uppers I built. You can load out to 1.170" OAL since I just tested one of my open loads to see if it would pass the plunk test. It does. I did lighten it since it has a heavier contour than I like. I am very happy with the accuracy out to 50 yards since that is as far as I have tested it and should be good enough for USPSA PCC. I load 1.140-1.150 OAL for Glock 17 mags. Thanks, Eric
Good to hear, that's the barrel I ordered for my PCC build.
-
15 minutes ago, gatortommy said:
When I started shooting my PCC I was using a 3 MOA. There were times in the bright sunlight that it was hard to see, so I changed it out for a 8 MOA C-More that I really like. Easy and fast to pick up and good for all the distances we shoot.
Have you had any experience with a 12 MOA?
-
Whats the ideal dot, and at what size would you say you've gone to far for PCC?
Arex Rex Alpha
in "Other" & Pistol Comparisons
Posted
Should be the same kind of deal on the Alpha then? I plan to polish everything when I get it, but I’m not 100% sure on part cross comparability with these. I’ve had a could Shadows and tanfos that I’ve done all my own fitting and trigger work on, but I’ve never had a Sig style platform.
Sent from my iPhone using Tapatalk